Performance Boats Forum banner
lube
1-17 of 18 Results
  1. V-Drives
    After a recent refresh i started using Redline Superlight Shockproof Gear Oil in my V-drive. I just checked the fluid level and while it was right at the correct level, the color of the fluid caught my attention. The photo below shows some fresh oil and a sample of some of the used oil (used...
  2. Greg Shoemaker
    Where do you lube a aggressor pump and what type of oil for a Jet-a-way and how much to add? Mine leaked all the oil out of it. Thanks
  3. Jet Boats
    Freshening up my bowl bushings after 4yrs and ive been using gear lube since i installed them and have used gear lube on all the pumps ive done for myself. im thinking about switch to red and tacky for the bowl as well. does it wear more? I was told to water lube them but ive never tried it...
  4. Parts for Sale
    For sale 1 "new" Master Lube pre oiler/accumulator. This is the marine model so it is the taller 3 qt model. I purchased this new in 2012, and never used it. This is the electric valve model. $300.00 obo plus shipping. Thanks, Lock 702-373-0100
  5. Jet Boats
    When I look into the place diverter I see the backside of the impellor...the nut looks like it has a zerg on it...does it? Should I lube it...how the hell do you get in there!?
  6. Jet Boats
    I know there is a zerk where the driveline goes in...any others I should be greasing?
  7. Outdrives
    Ok, I am thinking this is going to be a seriously rookie question but I would rather ask a dumb question as opposed to making a dumb mistake. I have had a boat with a jet drive, and one with twin outboards but this is my first sterndrive boat. I just bought a DCB F-26 and it has a Bravo 1-XR...
  8. Outboards
    I have Mercury's gearlube pump and it is only for Quart bottles. I use the Redline Heavy Shockproof Gearlube and it comes in quart bottles as well as gallon ones. I just bought a gallon bottle and my stupid pump only fits the quart bottle. I went to buy a new one and I can only find them that...
  9. V-Drives
    I want to run Red Line Synthetic "shockproof" gear lube in my C500 any thoughts here anyone have any experience with this product ? Tom
  10. Jet Boats
    So we will not have any method of releasing the pump from the engine to warm up the engine. Just temporarily not continuous. I guess there is a way to tap into the wear ring and lube it? I'm sure I can figure something out but anyone have something simple? Also the lube the bowl thread...
  11. Jet Boats
    So how often should i top off the gear oil in my bowl? will i find water in it or should it stay pretty clean like engine oil?
  12. Jet Boats
    I have a stiff steering cable. How can I take the cable out and lube it? I have a Teleflex NFB rack and pinon steering system and a legend jet pump. I don't think that I should have to get a new cable if the one I have only needs some grease.
  13. Jet Boats
    Guys ... what kind of oil or grease are you suppose to use on a Panther Pump? There is a plug on the inside of the boat just above where the shaft goes into the pump. I was told to lube it each time I took it out. Is that right?
  14. Jet Boats
    Im curious is there a way to lube the throttle and control cables? the boat i just bought has been sitting and although they work they seem kinda sticky and dry?
  15. Jet Boats
    My dad owned my jetboat before I purchased it from him. He said he had always had a problem losing lube oil from the bowl. It's supposedly a JB pump. There is about 20 hours on the rebuilt 455 and on the jet drive.(new seals, impeller, wear ring etc.) When he rebuilt the jet drive, a...
  16. PB Open Water
    What a bunch of Winners, My friends sister went out there to look at getting a IS250. She is 19 and went there with a so-called friend. She ended up leaving with a used IS250 with 19,000 miles she bought for 30k they added the warranty on top of that, and with her 690 credit score her rate...
  17. PB Open Water
    Guess those NBC investigations finally paid off. http://cbs2.com/local/EZ.Lube.5.2.621482.html Santa Ana-based EZ Lube Inc. has agreed to pay $5 million to settle allegations that it charged customers for unnecessary or unfinished repairs. The settlement stems from a 2004 investigation by...
1-17 of 18 Results
Top