Performance Boats Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. GN7 On the Dyno
    Going from a std. Deck BBC , now my Dist naturally won't fit my Tall Deck I have ordered. So being the tight ass I am ,and don't care to pop another $300 for a new MSD , why can't I just take a grinder to the old stop collar and grind it smooth (somewhat smooth if all goes good :wink2: ) and...
  2. Propellers
    Anyone successfully had there V drive prop bored/reamed deeper so it will go further up on the shaft?
  3. Paint and Fiberglass Repair
    My question is about a camper shell modofication. I chose this forum because I thought the members here would understand fiberglass stresses better than most others I could find. I have restored a 29 year old truck and they no longer make a camper shell that fits it. The closest size I could...
  4. General Performance Boats Discussions
    I just finished up a modification to the CD compartment in my 07 Rage. I'm sure this would work on the Heats as well. I generally use my Ipod and it's mounted in the CD storage compartment. I decided to fabricate a flush mounted door to cover this area and install a few shelves. Not alot of room...
  5. Outdrives
    Who is it that takes the 496 style sea water pump and machines it out and puts the stainless wear plates and gaskets in them? Someone in havasu?
  6. General Performance Boats Discussions
    Looking to modify my boat trailer to add a swing away or removable tongue. Recommendations in Havi? Thanks- John
  7. V-Drives
    I bought my spectra 20 a few years ago and it has been a pain in the rear to get on trailer. started to just add wider axles , but as we all know it don't stop there. I removed boat and cut trailer in half just behind front bunk support added 1.5 feet to make trailer longer. put new keel support...
  8. General Performance Boats Discussions
    Can anyone provide some recommendations for a place in Lake Havasu that can convert a standard trailer tongue to a folding tongue application? I'm looking for a robust, welded, brake line extension and repainted conversion on a Nordic trailer. Thanks in advance... Steven
  9. Jet Boats
    So I don't like the reverse outlet hanging down in the water. I'm thinking about machining it off so we don't drag it down the drag strip. And I don't like how it opens up (an increase in area) just in front of the reverse bucket. Thinking about machining that off as well. Any reason why not...
  10. General Performance Boats Discussions
    I've debated for several weeks wither or not to post and offer my services on this topic. At the end of the day this is helping to keep people in their homes, so I decided to post. I currently manage a Loan Modification/Loss Mitigation company located in Irvine, CA. We are attorney back, can do...
  11. General Performance Boats Discussions
    The existing loans on my two homes is not that high. Todays rates would be a little less..maybe 1/2 point. The loans I have are with Countrywide and Citi Mortage. The question is can you do a "loan modification" to reduce that rate without doing a total refi to lower your rate. Do not need to...
1-11 of 11 Results
Top