Performance Boats Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 63 Results
  1. Parts for Sale
    I have a new Armondo racing aluminium oil pan for sale with pick up. Brand new never installed. Paid $700, I'll let it go for $600 plus shipping. Thanks
  2. PB Open Water
    I was wondering if anyone has done a comparison of the efficiency of different water pick ups shapes to see which shape flowed the most water ? GD
  3. Tow Vehicles, Cars and Parts
    She doesnt have much do to the fact there willing to spend 5k on a travel trailer..her new hubby prefers ford truck xlt must be v8 or v6 so they can tow such trailer with dependability.............anybody have a older truck they would have there kid drive..I JUST BOUGHT THEM A NEWER HONDA CRV...
  4. GN7 On the Dyno
    First off, this is my first BBC as I have run 385 Fords until this boat. That said, I know the peculiarities that would make a 460 do this, but I'm lost on this 454. Sorry for it being so long winded. The boat is a 1991 Canyon tunnel and the engine is a 454 4 bolt marine engine original to the...
  5. Parts for Sale
    Brand New cond. Champ CP208 Street/strip pan and matching pick up. Installed only to run simtest on new motor. This steel pan has one 6” trapdoor, and louvered windage tray. Oil capacity is 8 qts. including filter. $200. shipped anywhere in the lower 48
  6. V-Drives
    No I'm not putting a water pump on my blown injected hydro but I need to come up with a way to feed the motor water while it's idling in no wake zone. I have a welded tube to my outboard steering now for fast water pick up what can I do for idle zones. I can't run anything off my cam because...
  7. GN7 On the Dyno
    Does anyone make an oil pump for BBC the the screen bolts on to the pump I have had 2 in a row come loose. The pick up will go into the the pump real tight and I even tack weld the pick up to the pump ?????????
  8. Jet Boats
    Hey Guys, I'm Resealing my pick up for the first time. I have the pump out and have removed all the screws on the sides. There are 4 Jackscrews, 1 on each corner, and it appears to have 2 up front under the oil pan, do I need to remove these, cause at this point it's not splitting apart
  9. GN7 On the Dyno
    When tig welding the pick up to the pump body,on a BBC oil pump, is there a need to remove the spring and punger from the perssure valve, or can i just remove the cap from the body? I know that on a SBC the pick up and valve body, are all in the same pump cap, but on a BBC the pickup is on the...
  10. Parts for Sale
    Motor is complete race engine fresh 60 over srp forged pistons 13.5.1 new hell fire rings new bearings new melling oil pump 7qt milodon pan stroker clearance new oil pan gasket one piece 990 heads 230 and 188 new valves and valve job valve covers tall stud girtels hardartand sharp wide bodY...
  11. Parts for Sale
    $250.00 plus ride. Seattle area
  12. User "How To" Section
    help-i have a brendella drag hydro that does not have a water pick up thru hull for water pump;i read on here somewhere that you run yours from the rudder with a LINE OVER THE BACK?HAS OUT BOARD STEERING AND WOULD LIKE TO KNOW WHAT YOU THINK IS THE BEST WAY TO ACCOMPLISH THIS-don't want to cut a...
  13. Parts for Sale
    Looking for a nice 10 or 12 quart pan. I have a jet pan if someone wants to trade
  14. Parts for Sale
    Used V-Drive Oil pan with pick up. This was on a motor I picked up and don't need the pan. No repairs, but has a few small dents. Doesn't look like a bomb went off inside and seals well, but cosmetically not perfect. The dipstick hole is filled with silicon but can easily be cleaned out if you...
  15. GN7 On the Dyno
    I was having a loss of oil pressure problem after a hard pass. Start a pass at 70 psi and by the end of a 1000' or so I was down to 30psi and falling. I was told by a couple of the NJBA guy's they had this same problem and getting rid of the Dooley pan fixed it. I went with a Williams...
  16. Parts for Sale
    I have 2 cases skegs original paint , no rewelds. dual pick up. very good condition. 400. each case. 352 2661457
  17. Tow Vehicles
    Here is my deal... I drive a F-250 Super Crew gas v-8 (5.4l) as my daily driver. When I bought it. I don't know I'd be using it to tow a 28 foot deck boat so needless to say its under powered, actually its under powered when its not pulling anything. I currently get about 10ish miles per...
  18. Jet Boats
    Have a 90 Commander with 454 stock, mallory marine distributor with points. Was thinking of replacing points with more modern mag pickup. Nothing wrong with it, just can't leave stuff alone. Did my own fuel injection for the sand car so what's an ignition upgrade on the boat should be fairly...
1-20 of 63 Results