Performance Boats Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 45 Results
  1. Other Stuff for Sale
    1931 Ford Pick-up almost complete. 283 SB with Hilborn Injection set up for pump gas. Half rack steering installed and a 7 gallon Moon tank and new billet ignition that need to be installed. It was my fathers Truck and he Passed away a few years ago and the Estates wants it sold. $15,000 OBO...
  2. V-Drives
    Got another newbie question for you guys. Noticed that my water pickups stick down about 1 1/16" or so out the bottom. Seems this one is a bit excessive as the boat is running a cam drive water pump. Does this look too deep to you? Is the 45 degree slash cut the best setup? Could I get away with...
  3. Other Stuff for Sale
    Chevy/Gmc ... fiberglass bed cover (I believe its a snugtop) for 6.6 bed ... $400 OBO (:)eek(:)
  4. PB Open Water
    I was having a discussion with a friend and wondered if anyone had tried using a NACA duct for a water pickup ? GD
  5. Parts for Sale
    Looking for a BBC Dooley v-drive pickup and windage tray...Needs to run down the center of the engine not down the side of the pan like a Milodon style. Thanks
  6. Parts for Sale
    Bearing surfaces all look great. Fin has had the normal wear and tear. not bent tho. used in rivers with std drive height and always sucked up junk before switching out. $375 plus ride
  7. Tow Vehicles, Cars and Parts
    1961 Ford F100 Unibody restomod. Custom built by the Drew Brothers in Chandler, az. These trucks cost mid $30s to build and months to complete. This one has the original patina paint and is a real eye-catcher. The body is a 61 Ford Unibody pickup truck built on a 1996 Buick Roadmaster chassis...
  8. Parts for Sale
    Looking for a thru hull water pick, clamp shell style 1" ID
  9. Parts for Sale
    Looking For a BBC GenV Vdrive Oil Pan with pickup
  10. GN7 On the Dyno
    Olson 12 qt v drive pan. Milodon pump. I have 1/2" clearance pickup to pan. Am I ok with this? I can close it up to 3/8 by using a washer under the stud but it puts the tube in a slight bind so I would rather leave it as is if ok at 1/2.
  11. V-Drives
    I'm changing from -10 to -12 water pick-up and pump feed line. Rex is out of the cav plate pick-up and transom thru hull fittings with no ETA on restock. Who's another supplier of these fittings? Thanks.
  12. GN7 On the Dyno
    I just bought a Dooley BBC V drive pan but need a pickup. Will any BBC extended pickup, regardless of brand, work with this pan? Also, is a windage tray necessary? Application is a family ski boat.
  13. Tow Vehicles
    OK - The engine in my 93 blew up and the truck is not worth repairing. I spent the weekend on line and driving all over. located three trucks. All are Chevy ext. cab, diesel. one is an 06 2500 with long box, black, 99,000 miles for $24600. one is an 07 3500, silver long box, 53700 miles for...
  14. V-Drives
    Anyone seen one like this in front of the prop ? When did they stop using this type of crap ?...............( . )( . )........:cool:
  15. Tow Vehicles, Cars and Parts
    Daily driver 1929 Ford Model A Pickup street rod. ALL STEEL NO BONDO, 4 wheel disc brakes, Blown Chevrolet small block, brand new ford rear-end with racing diff cover, aluminum radiator, upgraded suspension, only minor work needed to complete, runs and drives great, too much to list. 24k obo...
  16. Jet Boats
    Hey guys. Thanks for all the info on the rudder. I'm hoping you can be equally helpful with this. My sleek has been having trouble getting air in the fuel system. It has dual saddle tanks. Fuel runs from both of my tanks to a fuel filter then one line runs to the mechanical pump. I blew air...
  17. V-Drives
    anyone have a oil pickup tube for a dooley oil pan, bbc vdrive, plz let me know
  18. Parts for Sale
    Ok guys do you have a oil pickup for a v-drive, I have a 14 quart dooley pan for a BBC! Also do I need a windage tray? let me know what u have and how much your asking
  19. GN7 On the Dyno
    Dodge magnum 5.2 has a threaded pickup. Mixed information on whether to use a sealant on the threads or not. Yes/no? If yes, what type of sealant might be recommended. If no, just lube the threads and position properly?
  20. Tow Vehicles, Cars and Parts
    I have all of the glass for a 69 Chevy Pickup. All is in great shape except for one small chip in the windshield as noted in the pictures. $350 for everything plus shipping or can pick up in Oklahoma. 405-919-5772
1-20 of 45 Results