Performance Boats Forum banner

piston

  1. Goodson PRF-812DW Piston Ring Filer

    Parts for Sale
    FREE SHIPPING Goodson ring filer with deburr wheel option. Set up the 1st ring and cut the rest. As new condition. $560 Miami, FL 918 two six nine 8084 These are $900 new.
  2. [Question] Loosing an ounce off a piston

    GN7 On the Dyno
    I have a KB 572 that lost a rod and needed a new piston that got beat up in the process, among a few other things, It has Diamond 4.5 bore 18 deg 13cc dome ect. So I ordered 2 pistons(so I would have a spare) received them and the weight on the spec card said 625 grams. Wow... when I ordered...
  3. Broken Piston Skirt

    GN7 On the Dyno
    Is there a typical reason for what causes the piston skirt to fracture off at the bottom oil ring grove? Just want to make sure it gets addressed during any rebuild. 468 BBC with forged pistons, many years old. Thanks Chuck
  4. Motor Build - Piston and Cam combo for 20' Aristocrat Jet

    Jet Boats
    489 Motor Build - Piston and Cam combo for 20' Aristocrat Jet Long story short, the motor that was in the jet boat was toast. Low compression on 3 different cylinders, 2 of which had 95% leak when tested with a leakdown tester. Needless to say, the motor is now out of the boat and at a machine...
  5. Nicks in Piston

    GN7 On the Dyno
    A guy has a 454 long block he wants to sell me, that came out of a boat. It was supposedly professionally built and the the boat repo'd by the bank. This guy pulled the engine and found small nicks in the top of one piston and put another engine in the boat. He's asking next to nothing for...
  6. Ross Piston 4.310 Blower

    Parts for Sale
    November 22, 2015 Hello People Cleaning out my garage and I have a new set of Ross Blower pistons for sale. They were a custom job for a 10.200 block, 4.310 bore reverse dome, 1.525 c.h., 990 - 2390 pins, rod length 6.535 and crank 4.250. Change rods to 6.660 rod and use a 4.00...
  7. Pop off piston stuck in pump

    Jet Boats
    Anyone ever had pop off piston hang up ? Mine has worked flawless for 2 years. Now it's stuck. I took bowl & impeller off & disassembled the valve itself , but the piston is hung up. I wacked it pretty good with a piece of hickory & sledge hammer but it aint gonna budge. Gonna try and make a...
  8. WTB - 4.098 BBC piston again...

    Parts for Sale
    WTB - 4.098 BBC piston, DUH! I can't believe nobody has one of these. Thanks to all the guys who have checked for me to see if they had one. Its just a 396 STD. bore stock piston. So I'm trying one more time. A new one is $120.00 and that's just stupid when a set is $249.00. But I have to have...
  9. WTB - 4.098 BBC piston again...

    Parts for Sale
    I can't believe nobody has one of these. Thanks to all the guys who have checked for me to see if they had one. Its just a 396 STD. bore stock piston. So I'm trying one more time. A new one is $120.00 and that's just stupid when a set is $249.00. But I have to have all the pistons changed on the...
  10. Need Some Piston Advise

    GN7 On the Dyno
    I have a mid 70's LS7 454 with 12.5 to 1 compression. Pretty sure I smoked a piston. The pistons in the motor are 3963551 and the heads are 6272990. Not sure of the cam but it is a major thumper. I'm getting tired of going to the airport for avgas. So what advise would you have for a piston...
  11. One lousy piston?

    Parts for Sale
    I just need one 4.098 396 BBC stock cast piston. It is a 325 HP from 1967. If you have the 375 with the higher dome I will machine it down. Can't believe finding even a new one is so hard. HELP!!!:bangmyhead:
  12. Piston search and sell

    Parts for Sale
    I need a stock 325 HP 396+ .030 piston. I need two LS-6 454 + .060 TRW pistons PN #L2349+.060, I have 5 good 4.145 bore BBC pistons with dome with 8 good rods, a crank and two dinged up pistons. 8 454 STD bore stock pistons, 5 rods, harmonic balancer . Make offer on any or all of it.
  13. BBC piston numbers

    GN7 On the Dyno
    Wags/Steele/Paul/Whomever: Trying to move a 477 BBC short block for a friend that doesn't know the fine details of what he has (it was his spare engine) These are in a GM107 / 3999289 454 block... Pistons are stamped on top of the domes with 54100 , they have a pretty tall dome even for a BBC...
  14. BBC Blower Intakes & Zoomies & Pulleys & JE Piston

    Parts for Sale
    Hi, I have some BBC blower stuff for sale and the list is below, everything is OBO + the ride please call Jeff @ 1415-202-3802 or pm me. Thanks 1. New Enderley tall big and ugly (BAU) 5 inch butterfly's only used for mockup and was to big for my application never ran, at Good Vibration...
  15. BBC Isky lifters/CP piston

    Parts for Sale
    Solid roller lifters with hi pressure oiling pin 175.00 OBO Set of CP 496 tall deck pistons 11to1 compression 200.00 OBO 909-238-4611 SHawn
  16. Piston rings

    GN7 On the Dyno
    First off, kind of cool on the rename in honor of Bob. I have been out of the engine building loop for a long time and decided to freshen up my mark iv bbc. 12.5to 1 with plate NOS, going with an aluminum head, (AFR), Dart not sure yet. Ring choices sweep from 150.00-500.00, some what of a...
  17. [SOLD] Total Seal Piston rings CS9150-15 4.610 bore New in box

    Parts for Sale
    have a set of rings I ordered for a 568 I was building .. they are part number CS9150-15 for a 4.610 bore plus .005 File fit .. New in box sealed .. Summit racing has these for 291.00 http://www.summitracing.com/parts/tsr-cs9150-15...... will sell for 150.00 free shipping .. Bill 530-333-1047
  18. piston storage

    GN7 On the Dyno
    dont know how many others are allready doing this but i recently figured it out and thought id share, works well for the small bore guys (4.4 and smaller) if its pistons without rods they stack and lock nice ,and they are about as cheap/comon as a milk crate :). any other easy storage ideas...
  19. Scuffed Piston

    GN7 On the Dyno
    Any ideas what might have caused this? Motor's out of a jet boat, decent 565, probably around 850HP, 11.5 CR, single Dominator, mild solid roller cam. All the bores show about 6-7 thousandths clearance and are round. Only happened to #2 piston and only on the side opposite the dome. The other...
  20. RCD Piston rack

    Parts for Sale
    RCD Custom cnc manufactured piston rack used very little and in great shape...$125 Dan Aaseth Canyon Marine 661 510-6362
Top