I know this is not a V-Drive question, but this section seems to get more traffic than others. Is there an ad blocker I can get to stop all the pop up ads that always come up when I am trying to open threads? I understand the site needs them to pay bills, but it gets real annoying trying to...
I bought a new to me boat and it has a pop off on the pump, it came with some controls and reg, some one cut all the lines and everything is in a box and a button on the wheel.
Can someone put up some photos of plumbing or explain how to plumb it, Thanks
Anyone ever had pop off piston hang up ? Mine has worked flawless for 2 years. Now it's stuck. I took bowl & impeller off & disassembled the valve itself , but the piston is hung up. I wacked it pretty good with a piece of hickory & sledge hammer but it aint gonna budge. Gonna try and make a...
Anyone know the part # for this 5 port 3 way solenoid control for my popoff. It leaks when in the neutral & closed position. .......or a # for a rebuild kit ?
Found this Part# MMA-41PAAP
so it may be a 4 way, and I'm not certain of spool type ?
Here is a valve that is commonly used for a Pop-off system. A quick dump valve, mounts inside the boat one end connects to the top fitting on the pop off valve and the other plugs into the 5/32 pressure line from the co2 tank. About $20
What are you guys using to operate your bucket and pop off? I have the Clippard Maximatic's running at 16V system and with a 150 psi regulator, I have used up 2 of them. I am going to reduce the regulator size to 110 or so. I called Clippard this is their economy line of solenoids and are not...
Okay, I'm no where near the level of needing a pop off valve, but I'm curious about their operation. I understand how it works and why, just wondering how they are actuated. I've seen where they are operated by pressure (CO2) but can they be operated manually (by cable)?
Was wondering if I should be concerned about this , while warming my engine in the drive for an oil change.....also heard last time out on the lake at the dock warming engine......."a slight pop" out of the exhaust while I'm slightly tapping throttle to maintain a idle.....after idle...
I've got a American turbine At J pump and I've never seen one with a pop off valve ? Is that because most people running triple digits run a Berkley pump ? I'm just curious, I haven't seen any American turbine pumps in race boats before.
Hey guys i have twin 1050 Holly 3 circuit with 4.5 pv and 84 jets in all corners. 600" force feed innercooler, Whipple 8.3 with vacuum bypass valve on blower. I am in vacuum when the pop happens. I am getting a little lean pop out of carbs when cruising at about 2000-2500 rpms and pulling...
HI, Im a newbie member to this site. Although I have soaked up alot of good info over the past few years brousing through the fourms. I have an 84 CP Tunnel that was a center steer 9.00 bracket boat. I have conveted it to a river boat. I need some good opinions, ideas, brands of pop offs to...
Hi all, my first post. I have recently purchased an 18'6" Everingham shallow vee boat
Looking for suggestions on step up ratio and prop.
Motor will be injected LS3, 620hp @ 6,300 & 576 ft lbs @ 5,100
thanks in advance