Search Results for ‘prime’

Boat is listed with Rick at Maxed Out Marine in Havasu. Boat was rigged by Mike at Prime Marine over a course of a couple years. We wanted to make sure it was done right and he didn't disappoint! Looking to upsize to a bigger boat. Boat is stored in LHC Make sure to give him a call if you are...

Anyone know what thread size the prime a jet is? Gonna get one ordered up this week or next... but want to drill and tap the bowl so I can get the pump back together... hopefully tonight.

I am about ready to install a prime a jet. The directions say to measure back 2 inches and drill. I am running a new dominator bowl for a 9.5" impeller. The bowl is a lot thicker than a stock berkley bowl. On a berk bowl it would go into the thin part of the bowl, and on the new one it would go...

I stopped by Prime Marine friday and snapped a few pics. :))THumbsUp

Can the prime a jet be installed on the hand hole lid? if not how do you install it if the pump is already in the boat and if drilling is necessary how do you keep the shavings out of the pump? any tips and tricks would be helpful.

Bought a Prime-a-jet off Ebay. Do you need to remove the bowl to drill and tap it? Doesn't say anything about it in the instructions. Pat Ps. I didn't buy it from Duane at Htp so don't want to call him. Not fair.

I've been told the manifold doesn't have a distributor hole or blockoff plate. How do you prime the oil pump/system on one of these engines?

OPINIONS please. A friend needs a local shop and I told him I'd get suggestions.

http://cgi.ebay.com/NIKE-DS-AIR-JORDAN-23-XX3-XXIII-PREMIER-TITANIUM-SZ-9-5_W0QQitemZ290269479056QQcmdZViewItem?hash=item290269479056&_trksid=p3286.c0.m14&_trkparms=72%3A1421|66%3A2|65%3A12|39%3A1|240%3A1318 WTF is going on here? 1) they are possibly the ugliest shoes i've ever seen in my...

Parker AZ, September 12th-14th join Prime Marine at the Blue Water Hotel and Casino as we debut the newest 21' Schiada River Cruiser rigged by our staff. We will be attending the Schiada Event and would like to take the opportunity to invite you to check out our craftsmanship first hand this...

Finally - BMX Boss, I may be late in the morning...

Hot off the presses and just in time for the Irvine V-drive Regatta, we have just completed our new t-shirts. With any luck we should have these available at the Irvine Lake Regatta. Special thanks go out to Ed Hume Designs who burned the midnight oil to complete these for us. Prime Marine

This Schiada is in the final stages of being rigged over here at Prime Marine. If all goes right it will debut at the Irvine Regatta.

For those of you who didnt know.. Prime Marine has moved to a new 13,000 sqft state of the art facility in Rancho Cucamonga and offers full services for all your boating needs. Prime has set the standard in custom boat design both in racing, performance, and recreation. Start your season off...

Time to get over to Grandmas. :)grn:):):)

You know the one, the one that was posted on HB at Thanksgiving. Thanks in advance