Performance Boats Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 23 Results
  1. West Coast - South
    Hello, I'm looking at a 1965 Stevens Flat bottom. Hoping someone here can help. The boat is a 17ft Stevens Silhouette with a 1964 Pontiac 389 GTO Motor and v-drive with the exhaust through the transom, also has set an forget and peddle for cav plate. Seats 4 . It sets on the original tandem...
  2. PB Open Water
    Am I correct in this? My boat and trailer weigh about 5,000lb. Can I subtract my tongue weight then divide by 4 to get my minimum tire load rating? Obviously I would need to add in a safety factor to that number.
  3. Jet Boats
    I'm getting a surge, almost a miss, between 3200 and 3800 rpm. The motor is a 508 BBF, 12:1, .715" lift mechanical roller, timing set at 34 total. Rings, bearings, timing set, valve job, lifers and rockers this season, but the bottom end is basically the same combo as last year. What's new is...
  4. Boats for Sale
    What do you have for sale? I recently sold my boat and the deal I was working on fell thru. 40-60k range 27 foot or larger 496 or bigger must have low hours No closed bows unless a cat nordic heat Daytona tall deck sleekcraft Deckboats etc... let me know what you have. Ready to buy...
  5. GN7 On the Dyno
    Hey guys i have twin 1050 Holly 3 circuit with 4.5 pv and 84 jets in all corners. 600" force feed innercooler, Whipple 8.3 with vacuum bypass valve on blower. I am in vacuum when the pop happens. I am getting a little lean pop out of carbs when cruising at about 2000-2500 rpms and pulling...
  6. Parts for Sale
    Anybody out there that can help a fella out?? (Casale) I'm in Northern Ca.
  7. V-Drives
    I have a custom 1 off chopper for trade. If you are interested in looking at it we can arrange something. I will complete the bike if there are no good trade options. If finished i want 10000. Right now, cash, i would take somewhere in the neighborhood of 6500 and it literally needs 1500 to be...
  8. GN7 On the Dyno
    I am running Autolite AR13 plugs with my MSD 6al Box. I know the motor is running rich at low speeds and have never checked plugs after a full throttle run. Having a miss above 2500 rpm and thinking of trying next step hotter plug to help burn off excess fuel.(90% of my driving is in the...
  9. Propellers
    i need a new wheel...any one out there have an old prop taking up space in the garage?...let me know what ya looking for something in the 29-32 pitch range (srx, mazco re, chopper, lightning et...etc) thanks shaun Edit: ill be running it on a v6 omc so a small shaft merc hub or an...
  10. PB Open Water
    mortero fail elRellano - YouTube
  11. GN7 On the Dyno
    What would be one step hotter plug than an NGK 4554?? That is the # summit gives for the recommended plug for the Brodix heads. I want to try one range hotter. (I've ran that number for a couple years.) Thanks!!
  12. V-Drives
    I've been shopping gauges for a few weeks and I've got it narrowed down. The only problem is the gauges that I really want in my dash have on only one choice in range for oil temperature, 140-320F. I don't think that is gonna work. What kind of oil temperatures do you see? What is a normal...
  13. PB Open Water
    Little Kim just shot off 4 short range missiles (roughly a 60 mile range)....This little man needs to hire MJackson's doctors for some sleep assistance......:D
  14. PB Open Water
    Does or has anybody towed a 25' boat with one? The good and the Bad. Just thinking of changing. I tow with a GMC Denali Truck it works great but mileage is getting up. trips to the river. Donnie
  15. Outdrives
    I was wondering what someone might think the range is for say :) a 26 cat/deck with a 525 and 100 Gallon fuel tank is? There is this small poker run that goes 90 miles down a river here in Va, and i was wondering would the ultra make it? Wide open??? :D
  16. Other Stuff for Sale
    Anyone in the LA, Long Beach area have one they want to sell? Either white or stainless? 4 gas burners and an oven? Can pickup this weekend.
  17. Jet Boats
    It's been fairly warm here this week (for Utah winter standards). Last couple weeks were freakin cold. This week it's been in the 40's. It's making me want to break the boat outta mothballs!!!!! Freakin' tease!!!!!! I know there 3 more months before I can, so this is making it that much...
  18. PB Open Water
    I’m preparing the Thanksgiving dinner at my house and I need to find a free range/organic Turkey for the dinner. Anyone know in the So Cal area I can buy one…Thanks in advance.
  19. NorCal
    Any takers? Figured we can launch from Orwood and run to Wimpie's. Long range cruise by Disco Bay, Tiki Lagun, Lost Isle, Herman & Helen's, Tower Park route. Anyone who's down go ahead and post up.
1-19 of 23 Results