if anyone has a similar take off intercooler from an old set-up or knows where i can have some cupranickle cores built or where i can get mine fixed being they are slainless steel i would appreciate it greatly as mine are starting to leak . need to start getting some options so i can figure out...

Anyone familiar with this old 1 1/8 box? Is there a seal kit for it or should I just replace it? It leaks about a gallon every 4 laps....only at speed. :confused:

Duplicate thread. Sorry.

Hello all, I'm trying to keep a boat in service for the next couple of months while I build a 468 BBC and source all of the parts to install a BBC into my '70 Cheetah. This boat is new to me. Has a Olds 350 in it. Yesterday morning my son and I took the boat out onto the lake. After...

Two different boat/trailers, but I am annoyed and wanting a good quality tire to replace the tired shoes. I checked pressure and inspected tires before I left on Monday last week and trailered the boat approx 185 miles then gave them a visual before heading back and lost a tire about halfway...

Anyone know about how much it would cost to replace 1 stringer, re glass the front bulk head and flow coat a kurtis runner? And Who could do it, I live in the Sac. foothills? Winter project.

Mechanical fuel pump to carb fuel line

I am doing some cleanup work on my boat this winter, and one of the items to address is the rear motor mount. I hate to replace it since its an Edelbrock piece, but it was split at some point and is only held down on the passenger side by a piece of angle iron. Not good, and not done by me BTW...

I'm wanting to replace the wood in my transom due to wood rot. what's the best method and materials? my boat is a 79 36' sleekcraft with twins. thanks

I have a Teague 509 blower motor ( the 800hp) with their custom cam, sorry I dont know he specs. I just winterized it and backed off the rockers . I know the springs are 8 years old and have not been replaced or backed off while in storage before. Should I take them out and replace them. I...

Well I finally got my old steering cable out. I did find a numer on it..Morse 300-180 IN 7190. Can someone tell me what this means and if I replace the diverter cable will I need to measure it and where do I take the measurments from? I understand Morse was bought out. What should I replace it...

I've got a 10* Menkens v-drive. The out put bearing in the whirlaway needs replaced. Does anyone know how it comes out? Do I just press it out the back? Is there a snap ring behind the seal? I tried to press it out, but was afraid to apply any more pressure for fear of breaking the housing if...

Picked up a Mach 1 Jet that has been violated, need missing pump parts. 520-310-9016(:)eek(:)(:)eek(:)(:)eek(:)(:)eek(:)

It gets a little more "pitted' every year and has been on the boat for 5 seasons. Is it time to replace? Should a different material be used instead of aluminum?

like i said i am getting ready to replace the wood in the hydro's floor, and probably the stringers, what type of wood do you guys recommend? this is a1971 sanger drag hydro, and i want to keep it as light as possible.

I just bought a super nice 1994 Cobalt. It has this SUPER UGLY bottom paint on it. It looks like they drove through a Tar Pit. I have paint remover that im removing it with. Im wondering what the best product would be to use on the bottom. The white Gel is stained so I need to cover that up. The...

The carpet in the Nordic I just picked up needs to be replaced. I was thinking of removing the interior and having bedliner sprayed in. Anyone have any thoughts of why not to do this? (BTW, the stringers and floor are in good shape)

How do I get it off and where do I get one??????

Pulling heads. Do you replace the head bolts? UPDATE pg. 2 Subject says it all.. SBC 350. engine runs great so i want to eliminate the possibility of a head gasket on backwards or some other blocakge. Easy enough to pull the heads and put new gaskets in.. ' Do you reuse the old bolts or...