Performance Boats Forum banner

resin

  1. Paint and Fiberglass Repair
    Replacing floors in my 79 Eliminator What mat/cloth for panels and what for tabbing?
  2. Paint and Fiberglass Repair
    Has anyone used the epoxy from Pro Marine Supply? They have pretty good prices, and free shipping. Just looking for some opinions.
  3. V-Drives
    Edit Jan 2016 - go to this link to see what I ended up doing… Starts on Page 10, Post 140 of my original thread about My 1967 Belmont Flatbottom - http://www.performanceboats.com/v-drives/170458-my-1967-belmont-flatbottom-10.html Edit: I sorta start this all over again on page six with post #77...
  4. Paint and Fiberglass Repair
    Has any one ever been successful at repairing cracks in a clear resin over wood this was done by some one jumping across deck:(((((( when cold any help I would like to try something a little less invasive but may end up redoing entire deck include pics as best as possable, Thanks WildBill
  5. Paint and Fiberglass Repair
    So im spending some much needed time on the 58 Mandella. The original plan was to just refinish the deck. Which I sanded to bare wood and varnished with interlux Gold Spar clear. After doing that the flaws in the gelcoat on the hull started to more apparent. So on goes the work.:54: I am new...
  6. V-Drives
    hey guys i recently pulled up all the delamated glass up on the stringers and floors of my hondo what is the correct cloth to use and how many layers for sringers and floors i heare epoxey is pretty easy to use like the wedt system but there price is pretty steep . any suggestions will help
  7. Michigan Hot Boats
    Replacing part of the floor and thinking of using epoxy resin. This is my first dealing with fiberglass and one place here in Flint town suggested that to stay with polyester as it is easier to work with besides the cost diffrence.Seems to me that epoxy would be easier and better due to the pot...
  8. Paint and Fiberglass Repair
    Is polyester resin ok to use in glass tanks or is there a better choice? Looking to build some components that will see fuel and pressure changes.
  9. Paint and Fiberglass Repair
    I ASKED THIS QUESTION A WHILE BACK, I TRIED FINDING IT BUT COULDNT? OH WELL, ABOUT TEN YEARS AGO I HAD STARTED STRIPPING THE HARDWARE OFF THE BOAT, WHEN I GOT TO THE WATER PICK UP FOR THE V-DRIVE, IT WOULD NOT COME OFF AT ALL!, I HAD TO TAP IT WITH A MALLET FOREVER, THEN IT CAME OFF, WHEN I...
  10. Jet Boats
    in reading, issues have come up with poly resin being used for repair in boats. my understanding is that the preferred resin to use is epoxy based opposed to poly. the reason seems that the poly will absorb moisture. i could be wrong though. also it has been said that the poly will delaminate...
  11. Paint and Fiberglass Repair
    When using Laminating resin, how long(as in days) can You go inbetween adding additional layers? I have searched but have not found the answers,,,,,,,,Hal
  12. Paint and Fiberglass Repair
    can be added to cover up old worn, chipped, cracked, ugly floors. Just add the toner to the mixed resin and in this case I brushed it in an attempt to look like wood grained flooring.
  13. Parts for Sale
    Need about 3 gallons of resin in the phoenix area to finish stringer job on sunday lemme know if u have anything
  14. Paint and Fiberglass Repair
    I would like to no if i will get a good bound if i apply resin on wood thats been painted
  15. Audio
    I have some new sub boxes going in that I have resined and glassed the hell out of on the outside but was wondering if I am supposed to do the inside as well. I had heard in that past I was not supposed to because the density of the mdf helps with the sound but I have also heard to do the...
Top