Performance Boats Forum banner


  1. connecting rod comparison for a bbc strocker

    GN7 On the Dyno
    If you are looking at the same brand rods and one is clearance for a stroker application and the other is not. Where is the difference in the rod? Hope I asked this right. Thanks Troy
  2. [SOLD] 440" BBC Race/Hot Rod Motor

    Parts for Sale
    SALE PENDING Complete BBC 440" Motor, was in my Bezer and made 630 HP. 12.5:1 compression ratio, Splayed steel main caps, bushed lifter bores, studded block, H-Beam Rods, Polished Dart Pro 1 Heads, Holley Strip Dominator manifold w/850 carb, HEI ignition. The crank has a .25" key 180* from the...
  3. The Hot Rod and Spare Parts

    PB Open Water
    Afternoon at the waterfall................
  4. New ARP L-19 and ARP 2000 Rod Bolts

    Parts for Sale
    Eagle ESP BBC Rod Bolt Upgrades. ARP L-19. P/N 14020 set new in package unopened.$120 ARP 2000 set removed from a new set of rods for upgrade never ran $90 Prices include shipping..Priced well below Jegs or Summit. Can be used in other rods. 7/16" diameter 1.75" under head length 1/2" 12 point...
  5. When Hot Rod covered boats

    Seems I don't throw away the things I like. I have scads of old Hot Rod Magazines. Hot Rodders and Hot Boaters used to be cut from the same cloth. These are actually Car Craft 1961. As always, click on each page for a sharper, more readable image.
  6. Throwing a rod

    GN7 On the Dyno
    This may be a stupid question. When a big block Chevy throws a rod does it usually come out one side more often then the other. The reason I ask is I am making a belly pan for my race car and room is limited on the passenger side. I have to make it very close to the oil pan. Thanks
  7. [For Sale] Garage Cleanout #2 Hot Rod Parts

    Tow Vehicles, Cars and Parts
    1. Mallory Unilite Distributor ...part # 4764401, for '67-'76 Buick great, missing the breather plug on the side of the distributor body, could use a minor clean up...$175 2. Mallory Unilite Distributor ...part # YL501GV, for Olds/Hardin marine great, could use...
  8. [For Sale] 1946 Ford Convertable - street rod project

    Tow Vehicles, Cars and Parts
    I'm selling my 1946 Ford Convertable - See the ad in "Other Stuff for Sale" on this Forum !! Lynn (Pie) Youngs aka "Chicken Pie" - info. - (626) 375-4286 (cell - voice only, no text) Open to offers !!!
  9. [For Sale] 1946 Ford Convertable - street rod project !

    Other Stuff for Sale
    I'm selling my 1946 Ford Convertable - street rod project due to health issues. The car was constructed from a running "stocker". The car is 80 percent completed, but needs to be assembled and finished. The chassis has a TCI Independent Air-Bag front suspension (TCI factory installed), 8 inch...
  10. BBC Rod question

    GN7 On the Dyno
    I have a set of eagle h beam rods with .927 pin bushings. In marine app will the hold up ok? would it be better if I change to .990 bushings.
  11. iso crower rod

    GN7 On the Dyno
    ISO 1 Crower rod for a bbc 6.135 oldschool with bolts with nuts small block chevy large journal rod bearing will post pics and weight tomorrow just hoping some body may have one
  12. Transom angle on alpha hot rod

    I have built a stern drive hot rod from a outboard boat. Running a 300 he Chevy alpha. The trim is a just ed exactly to 21 inches at the trim pistons. If I trim up a touch more with the trail or switch I gain more speed. ? Is does the transom angle matter in the trim measurement. My transom...
  13. WTB 454 forged Dome pistons for + .250 rod

    Parts for Sale
    Looking for a set of forged dome pistons for a BBC 454 with a stock stroke ( 4.00 ) and + .250 rod ( 6.385 ) . Oversize +.030 or +.060 Not concerned about dome size as it will be running on race fuel . Must be in excellent condition , include pics , price and particulars . Shipping on my...
  14. [SOLD] Chrysler Hemi 426 NEW Rod Bearings

    Parts for Sale
    Up for sale are 5 sets Top Halves Only Rod Bearings for the 426 Chrysler Hemi from Childs & Albert p/n R4264B std.. these are typically used in the BAE Hemi...$150 for all 5 sets Thanks for looking
  15. [SOLD] Clevite CB-743 HN rod bearings BBC standard size full set NEW

    Parts for Sale
    Have a full set of Rod Bearings for a BBC in Standard size.. these are Clevite CB-743 HN (Hardened Narrow) I can not use them since im running a .010 crank now.. brand new in the box set for 8 rods.. New @ summit is 111.76 .. sell the set shipped to your door for 87.50 .. located in the...
  16. Bryant BBC 3.980" billet crank, 1.887" rod journals

    Parts for Sale
    Sonny Bryant lightweight billet crank for a BBC. It is a 3.980" stroke with 1.887" (Honda) rod journals. It is in perfect shape and has never been damaged. $450 [email protected] or (949)248-0083
  17. [SOLD] ARP2000 Connecting Rod Bolts

    Parts for Sale
    ARP 2000 bolts for BBC part# 235-6401 396-454ci $100 new never used
  18. [Press Release] Chinese Fakes, Hot Rod Magazine

  19. [SOLD] King Engine Connecting Rod Bearings

    Parts for Sale
    NEW - King Engine BBC connecting rod bearings; 13 each - CR808XPN001 3 each - CR808XPN All $35 to your door, Cont. US.
  20. New bbf 429-460 arp rod bolts

    Parts for Sale
    Have a new set of rod bolts never run. $60 shipped USPS flat rate envelope. OR PICK UP IN RIVERSIDE CA. ARP# 155-6003 BOSS429-460 W/SQUARE HEAD