Performance Boats Forum banner
1-7 of 7 Results
  1. V-Drives
    Sub-image wink/smile/hand gesture/personal logo Sorry, this was the end of a very stupid post, which I couldn't figure out how to just the end no attention ( admins, how DO you remove your own post?)
  2. Paint and Fiberglass Repair
    Here is my latest boat related project that turned from a "fix" to a total rebuild of the engine/storage hatch on my wifes 20' Canyon Silhouette. Last year we noticed that the hatch was not closing correctly and that the wood under the hinges was failing. I finally got around to pulling the...
  3. Paint and Fiberglass Repair
    As it was pointed out to me in another thread, my Sanger seems to have a rot issue in the floor area directly under where the fuel tanks are located. Short of replacing the floor in these areas, I've come to find a product by name of Git Rot as a possible solution. Anyone have any experience...
  4. Paint and Fiberglass Repair
    There is rot on each side of my transom from where the old swimstep brackets used to be. The swimstep only had 2 brackets holding it on and some water must have gotten in there and caused the lower side of the mounts to cave into the transom. The previous owner took off the swimstep and had...
  5. Jet Boats
    So I am just finishing up my Hondo T-deck build and after getting my motor in I realized that I wasn't looking as hard as I had thought when I bought it and there is some rot right inbetween the mount blocks. Is there any way to get me through the summer without having to tear the boat apart...
  6. Paint and Fiberglass Repair
    I ran into a rotton problem on my 24 foot cruiser. Last year I noticed the fiberglass was bulging at the sides of one of my stringers (4x12 at 30 inches long) under the engine. So last week I filleted open the top of it and started tearing out the rotton stuff. What would be best to set in its...
  7. Other Stuff for Sale
    looking for a rott or lab puppy in so cal thanks ralph
1-7 of 7 Results