Performance Boats Forum banner

rotating

  1. Parts for Sale
    10 cp custom 9.5-1 compression ratio with 118 cc chamber head. Lateral gas ports, coated skirts, heavy duty .225 wall pins. Total seal rings. Lunati pro series 4340 crankshaft. Carrillo 6.405 steel rods with carr bolts, for 9.8 deck bbc. Crank has a no holes drilled balance job by reher...
  2. Parts for Sale
    I was going to build a BBC for my cruiser and decided I want to go bigger. All work completed by Rancho Performance Machine in Temecula. Cast 4 inch stroke crank ground and polished. Stock rods resized and honed on both ends and fitted with ARP bolts. Brand new SRP forged flat top 4.280...
  3. GN7 On the Dyno
    Is buying a rotating assembly the way to go? If so where would be the best place to pick one up? 540 555 inches..
  4. Parts for Sale
    Have a balance rotating assy 500 cu in tall deck billet crank carrillo rods je pistons asking 1200 the crank alone is more than asking price.. 392 stroke billet ent knife edged crank 6.535 carrillo rods and je pistons
  5. Parts for Sale
    please delete (1 set (8)) forged SRP Pistons S75FS, #P/N231513, 768176 (Info 231513 Product Detail Information - JE Pistons) (1 set (8) Eagle forged H-Beam Rods #ESP63853DL19 L=6.385 (1) 10/10 Eagle Forged Crank #5140, 454, (4.750 Stroke) 40hrs on motor when it was torn down and built for a...
  6. Parts for Sale
    496 Eagle steel crank, Eagle H-beam rods and Srp pistons Posting this for a friend. Complete Eagle Gen V 496 rotating assembly. Can be used with gen VI also. Its internally balanced. The parts have less than an hour run time. Motor was fired 3 times and shut down. Was built by a shop and...
  7. GN7 On the Dyno
    Going to spend this winter rebuilding my 496 mag ho, but I want to put in new high strength components. I already have a Raylar kit on the top end with new cam, intake, and aluminum heads, looking for my best options for a forged rotating assembly. Raylar has one for about 2700 bucks that...
  8. Parts for Sale
    Selling a rotating assy bbc this set up came out of a tall deck Eagel crank and h beam rods and je race pro pistons needs two pistons though pistons are shelf pistons so they have them in stock rods are 6.700 long pistons are 4.600 boAr asking 1250 plus shipping can txt or email pics
  9. Parts for Sale
    Factory forged crank...4.0in stroke ....7/16 factory cast dot rods....SRP Forged .070 over Pistons....10-1 Compression..factory harmonic balancer....Put this in my daycruiser last season and made 4 or 5 river trips and decided to go to the blower after all...rings and bearings are still in so...
  10. Parts for Sale
    This will make a 605ci BBC with a 10.2 block Crank is 4340 Scat 4.500stroke 10.10 Rods are 4340 Scat H-Beam rods with ARP2000 bolts Pistons are JE 14:1cr With Balancer Price is $995 plus shipping Keith 903.742.1178
  11. Parts for Sale
    Complete used SCAT Rotating Assembly, Forged 4340 4.000 Crank, Forged H-Beam 6.135 Rods, .30 over SRP Pistons part #139514 (9.9 compression), flex plate and harmonic balancer, external balanced. Also, hydraulic roller comp cam custom grind 612 lift 254 @ 50 lsa 112. All parts in good condition...
  12. GN7 On the Dyno
    Has anybody used or is anybody familiar with White Performance and Machine?? They are in Kingsport, TN. I am interested in their 496 BBC rotating assembly(ebay item #190589821419). Seems to be a fair price. Any constructive input would be appreciated. Thanks in advance. This is the eBay...
  13. GN7 On the Dyno
    I just picked up a used shortblock for my Excalibur project. It's a Dart Big M tall deck block with an Eagle 4.25" crank and 6.535" rods. Right now it's at 4.530 bore and could use to go to 4.560. Originally I had planned to just re-sell the Eagle stuff but with my ever shrinking budget I'm...
  14. Parts for Sale
    Wanted a 489 rotating assembly. Dont mind used as long as its good quality (lunati, crower, velasco). Needed 4.250 crank, 6.385 I-beam rods, dome pistons (10.7:1 or a little more). Also looking for a good cam (duration 234 and above with .613" and above lift). I have AFR 325 cnc heads so cam...
  15. GN7 On the Dyno
    well I need to buy a good rotating assembly, my 454 block checked out to be ok, no cracks, needs to be bored 30 over, but the stock crank is toast. I thought it would be easier to just get the whole assembly instead of getting a crank, then pistons seperate, also I dont think I would want to use...
  16. Parts for Sale
    all new and balanced, never installed in block or opened other than for balancing. i have balance card. probe forged pistons with 39cc dome h beam rods with arp hardware steel forged crank motor works file fit moly rings king bearing i have over 1800 in parts. sale complete for 1500 plus the ride.
  17. Parts for Sale
    Hays 20-130 Billet Aluminum Flywheel SFI 1.1 ($331.95 new at Summit Racing) GM Forged Steel Crankshaft 4.0 Stroke Arias Forged Flat Top Blower Pistons 60-A and Pins (Still Hung on Rods) GM Dimple Rods Moroso Harmonic Balancer SRS 3110A Roller Chain/Gears Engle Racing Cams Camshaft Engle Racing...
  18. Parts for Sale
    Cleaning the garage !! Chevrolet 383 Rotating Assembly and other High Performance Parts !! I would rather not ship or seperate.... $1500 OBO • Cola 383 Forged Crank • Cola 6" H-Beam Rods • JE Pistons • World Products 2.02 Heads W / ARP Head Bolts also Chevy 2.02 Factory Heads (Not Pictured) •...
  19. Parts for Sale
    Cleaning the garage !! Chevrolet 383 Rotating Assembly and other High Performance Parts !! I would rather not ship or seperate.... $1500 OBO Redlands Ca. • Cola 383 Forged Crank • Cola 6" H-Beam Rods • JE Pistons • World Products 2.02 Heads W / ARP Head Bolts also Chevy 2.02 Factory Heads (Not...
  20. Parts for Sale
    Internally Balanced BBC Rotating Assembly, includes Forged Arias Pistons +.060, GM Forged Steel Crank , GM DIMPLE rods, Moroso Dampener, Flywheel, and I'll throw in a Engle Racing Cams PN; TCS-7HYD camshaft,. Everything is in Excellent shape and came out of a lightly used Turbo Motor with Very...
Top