Performance Boats Forum banner
1-6 of 6 Results
  1. Paint and Fiberglass Repair
    got an old day cruiser, marlin empress 23 ft. 454bbc alpha drive. transom is rotten, caused the engine coupler to fail. called around prob cost 3-5 k to fix professionally. who here votes i tackle it. only worked with fiberglass a couple times
  2. Paint and Fiberglass Repair
    I'm wanting to replace the wood in my transom due to wood rot. what's the best method and materials? my boat is a 79 36' sleekcraft with twins. thanks
  3. PB Open Water
    Some of the Desert Storm Crew went for a lunch run to Pirates Cove today, we get there and there is a V-drive/Jet boat convention going on, it's crowded as hell and no place to park in sight and us with 3 30'+ boats to park, suddenly the clouds part a light shines through from above and low and...
  4. Jet Boats
    I replaced my transom about 2 years ago and my floor, there was a hack battery mount job on one of the stringers so I drilled in a few spots and it was all good, so I filled the holes with some dowels and resin and away I went...... running my boat with my 3 point mount. I have short motor...
  5. Jet Boats
    I have started tearing into my daycruiser and tonight i discovered the wood in the transom is completely rotted away. My question is can or should this be fixed. Should I just scrap it and count my loses or try to find another hull? The bad thing is I have the complete interior done and ready to...
  6. PB Open Water
    Something very very rotten in Denmark!!!!!! Look in the PB Pictures section/Manufactures/Hallet/F2 and you will understand!!!!! I'm appauled!! This is just wrong...oh so wrong!!! Time to bust out the photochop!! Mow, Wicky
1-6 of 6 Results