Performance Boats Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 183 Results
  1. User "How To" Section
    Looking for some inspiration in determining the position of the exhaust/muffler setup for 22 ft boat the BBC + turbo (under hatch) is fitted off the transom with inline Z-drive, crash gearbox behind motor the rear deck/cap slopes down to transom as the hatch is off the transom approx. 24", was...
  2. V-Drives
    Went out tonight with a friend in his first v-drive. It's a 17-6 Hondo T-Deck 5/8" runner bottom. The boat has a hard turn to the right. Just cruising down the river and you let go of the wheel it goes from 12 to 2 really fast. You have to really have to hold onto the wheel. What are some...
  3. Boat Parts Classifieds
    Brodix in the box's part # 10045427 these are the 18 Degree cylinder heads unmolested ready for whatever you want to do with them Manley Stainless Valves intake and exhaust Jesel Custom Pro series Rockers,Iski Triple Springs Arp Head Stud Kit,Arp internal stud kit,Manley push rods ,Morel 904...
  4. GN7 On the Dyno
    I need pro opinions on my blower set up. I want to keep it on 91 octane and reliable as possible. 502 8.75 to 1 originall heads were iron. (Mercruiser 502HP) Now have aluminum 115 chamber heads (procomp 320) Blower, B&M 420, Lee cooler, Pulleys 5.8top &5.8bottom running 1-1 I have 6.3 top and...
  5. V-Drives
    I'm curious what changes, if any, were made to your boat set up when you changed from running 1/4 mile to 1,000 feet or 800 feet. My primary interest is with the flat runner bottoms, but hydro's would be interesting too. More specifically, flats in the 8 or 9 second 1/4 mile class.
  6. Boat Parts Classifieds
    I'm selling my injector hat setup, I had hilborn freshen it up about a year ago. Its setup for race gas, comes with a river rat water pump too. My setup has all the lines, pumps and bullet tank. Ready to go!!! I'll be at billy b's next weekend and can bring it with me. 2500$ Also for sale is...
  7. Boat Parts Classifieds
    Crower bbc timing gear setup used in great condition, These came off our tall deck standard cam bbc 496 drag motor only had 24 passes on them and they work flawlessly! asking $ $345.00 +shipping located in Lake Havasu Az. call 928-486-1787 Wally
  8. Boat Parts Classifieds
    Crower bbc timing gear setup used in great condition, These came off our tall deck standard cam bbc 496 drag motor only had 24 passes on them and they work flawlessly! asking 325.00 + shipping located in Lake Havasu Az.[/img]Sold !
  9. Boat Parts Classifieds
    Everything needed to put FAST XFI on a standard deck height big block chevy. This setup just came off of my hondo. system works great I am just going a different route. the only thing not included is a fuel pump. comes with complete main harness with MAP sensor, IAC, air and water temp sensors...
  10. Boat Parts Classifieds
    This unit is all together mounted on one plate and includes the relay, boost switch for activation, on off switch etc. IN like new condition and has two injector nozzles. Has a jaz cell also. in shreveport, la 318-687-9088 or 318-470-1482 $350.00
  11. Boat Parts Classifieds
    Looking for a solid BBC blower set-up. Would prefer 540+ C.I. What's out there
  12. Boat Parts Classifieds
    Harwood Fiberglass dragster scoop- Black with 3" scoop tray and mounting plate Pretty much brand new only installed once on a boat for one weekend trip, then sold boat It comes with all the hardware to install on an engine, even throttle cable mounts I have for both 4150 series, and 4500 series...
  13. Boat Parts Classifieds
    SOLD-Complete Blower Shop Setup Manifold to Carbs Complete Blower Set up Blower: New 1471 “The Blower Shop” complete with billetcase, with anodized front and rear covers and snout. New Billet anodized 8MM upper and lower pulleys(46 and 48) New 8MM blower belt. New Billet anodized snout New...
  14. Boat Classifieds
    1977 Howard 19'6 V-bottom V-drive Old ski race boat. Boat has a th400 trans. Motor plates for BBC no engine . all Msd ignition box all wired in. Basically drop engine and go boating. Engine that came with boat was a Pile of dog Doo so i pulled it after 1 time of a couple minutes of driving it...
  15. Jet Boats
    What can anyone tell me anything about this boat? The owner wants it gone, but he knows nothing about it. I am 120 miles away, and looking for some info, before I take the drive. I think the boat is a Kona, from the '70s, (owner thinks it a '96). On the transom housing, it say's "Jet Boat Engr"...
  16. Jet Boats
    Just bought an old Kachina. Dude said it has a 12 jg pump?? Whatever that means. Anyone have suggestions for a shop that can tune my pump. I'm new to the boating world. Phoenix area. Thx!
  17. Boat Parts Classifieds
    I have a nice 8-71 TBS blower, just back from Littlefields for freshening. Blower comes with the short snout. Holley 1050's dominators were completely rebuilt by John Mooreland at C&J and setup for the blower (linkage included). These carbs are perfect, maybe even better than new. I have the...
  18. Boat Parts Classifieds
    Taken out of my 1972 Drag boat bottom piece is original to boat mounting holes is 23 1/2 on center Original Tank was in need of repair so replaced with Kinsler 3.5 Gallon tank New Eelco Mounts and Straps Moon Spinner Fuel Cap Almost finished doing but decided to go with bullet tank $400 plus...
  19. Boat Parts Classifieds
    Sold Sold
  20. Jet Boats
    Hey guys... Will the extra weight (115 lbs I think) of a Bowtie block cause any performance issues in a 19'? The engine has or will have aluminum heads so I'm guessing it would be close to a standard all iron 454 long block but I wanted to ask anyway. The boat will have a jet-a-way and I know a...
1-20 of 183 Results
Top