do some logs stick out further from the block than others? i just picked up a carrera 20.5 and the dog house hits the front outside of the logs causing the sides of the dog house to bulge out, but they are about 4 inches from the rear of the logs. so its either a new dog house so i can fit the...
now you can get into a boat with no credit
all boats are owner financed
sellers just want the payments made
must carry full coverage insurance
must have valid dl
proof of income
proof or residence
email,call or text for more info
for a list of boats available go to...
I have a 565ci 950hp chevy in a jetboat. It has two AED 1050's. The engine stumbles pretty bad when I transition from say 2500rpm to full throttle. The carbs have .035 squirters which I believe need to be larger. My question is how much larger? I've been told to go to .045's. What do you...
i know theirs a lot of hydro owners here, mine is a sanger ski hydro and everybody ive talk to said their good to about 125mph. mine used to have a elephant ear prop on it, and RB said to hold on like hell it will really get the tail up with the new prop he sent me. is there that much of a...
I just picked up a blown alky motor and am questioning the fuel system.
I have made 2 partial passes in the car and it was either running out of fuel or hitting the rev limiter, scaring me, and lifting. Wish I knew which but never looked at the tach and it does not have a recal. The motor is...
I am going to dump the pv on my 800 holley. The motor is a 454 mag ho with a weiand 177 blower. I have heard that you pull the pv and you must go up in jets. If I do so, how many jet sizes do I go up? Do you have to run the PV on a blower motor? Any info is greatly appreciated :)
I need to know the size of the threads for the bearing cap bolts, and the grease fitting on my suction housing. I want to chase the threads. Grease fitting 1/4 NPT? Bolts? Thanks in advance for the help. John.
i just finished my build and wanted to get any idea of what jets i should start out with, heres my build
eldebrock 100 cc heads
comp cam dur at .050 intake 262 exhaust 272 lift intake 682 exhaust 682 112 lobe sep.
i am running a 3 curcit...
Regarding my Holley 850dp carb. I am currently running 82 primary and 80 secondary jets with 6.5 powervalves. If I screw the mixture screws in all the way it picks up rpm and likes it. Does this mean I should jet down a couple sizes? the funny thing is after a WOT shutdown the plugs look perfect...