I just got a droop snoot because my original nozzel housing wore out. I'm running a Place Diverter with a 4* wedge. My qustion is, should I continue to run the wedge with the new droop snoot or ditch it?
I know this is a loaded question and will get a million different answers (kinda like aluminum impeller hp level).
At what hp level does it become necessary or a good idea to double drill the bowl to the intake housing and the snoot to the bowl?
this is on an early dominator 12-S
Anybody make one with the extra bolt holes already in it ? Looked at Duanes HTP snoot but it looks like it's only made with std bolt pattern and casting is kinda funky shaped where it would need to be drilled out for extra holes
I have two different droop snoots that are basically the same except the center divider. One is an original Berkeley with the divider running horizontally and the other is a AT which runs the inside divider vertically. Tell me which one works better if there are any performance gains between...
I have a spectra 20, refreshed 460 with some better pistons and some mild work in the heads. The old pump is coming out and have a fresh rebuilt one to go in. It was built for the specs of my boat. My question is would this heavy hull benefit with a droop or mini or even a straight ? It's the...