Performance Boats Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. Jet Boats
    Im wiring a Ford type solenoid from Napa (part# ST81) on my BBC. Its a 4 post top two large post ones Bat and ones Start. Bottom two small post ones Start and ones Ign. From the wiring diagrams i've seen around here I have a good idea how its supposed to be wired but if I run my Alt, power and...
  2. User "How To" Section
    I have an 84 Webbcraft Dynasty with the original 350 Chevrolet engine, I took the starter off the other day to have it rebuilt and have a question about the wiring on the starter solenoid. There is a brass or copper connector bolted to the solenoid where the main battery cable attaches and the...
  3. Jet Boats
    What are you guys using to operate your bucket and pop off? I have the Clippard Maximatic's running at 16V system and with a 150 psi regulator, I have used up 2 of them. I am going to reduce the regulator size to 110 or so. I called Clippard this is their economy line of solenoids and are not...
  4. Jet Boats
    My Prestolite starter requires a ford style remote solenoid so I thought I would check in and see what is absolutely the best brand to go with in a marine environment. What should I be looking for amp wise, etc?
  5. Mideast and Great Lakes
    I am looking for a working, new or used, 4-Wire Corsa Solenoid. Does anyone have one or two for sale?? One would be great, if you have it, but would buy 2! Thanks!
  6. GN7 On the Dyno
    Bad solenoid on a GM Hi torque mini starter. One of RB Performances deals. He's not answering his phone. Any input on a replacement solenoid as in type/brand?
  7. PB Open Water
    Im looking to find a basic 12VDC 3 port - 2 way valve that has 1/2" ports and can handle gasoline.... for switching between tanks. Can hydraulic or "light oil" valves handle fuel? Im having a hard time finding anything like that - tried Grainger, McMaster Carr, CP, Eddie, Imco.... have...
  8. Jet Boats
    I wanted to get the banderlog valve, but didnt want to spend the money and heard a few bad stories about it. Already have the basset T, but it really never seems to work perfect. Has anybody ever just used a window switch and solenoid valve on the water line right before the basset T? you could...
  9. GN7 On the Dyno
    The starter solenoid has 2 small posts, i used the one closest to the engine last go around but it's a pain in the ass to get too. Whats the outside post for?
  10. Parts for Sale
    Run this unit with an MSD window switch and make your own banderlog type device. $40 plus shipping. PM me if you want more details on how the system should work. Will eliminate the "t" valve that we all love so much.
1-11 of 11 Results
Top