Search Results for ‘solid’

Took these lifters out of a good running lake boat with small cam. They are in great shape. in shreveport, louisiana 318-470-1482

I had every intention of finishing this boat but between work and family issues there’s no way I can pull it off. It is a very sound hole the stringers are in good shape the transom is beautiful I’ve already dug out all the bad spots in the gelcoat and started filling them I do have the...

WTB bbc solid casting heads WTB bbc solid heads , 4.84 bore spacing . please send pics to [email protected]

Cam Style: Mechanical roller tappet Basic Operating RPM Range: 3,000-7,000 Intake Duration at 050 inch Lift: 249 Exhaust Duration at 050 inch Lift: 255 Duration at 050 inch Lift: 249 int./255 exh. Advertised Intake Duration: 281 Advertised Exhaust Duration: 287 Advertised Duration: 281...

I have a full set of like new Comp Solid roller lifters for sale. They are part #866-16 .842 dia and .300 long. $300.00 OBO shipped in the 48 states. contact me via e-mail please. Jim [email protected]

I have a brand new set of PAC #1224 solid roller springs. They were purchased on a brand new set of AFR 2101 heads that are being used with a hydraulic roller cam. They are $310 from Summit, buy this set for $225 Here is the Summit listing with all specs...

I have a used set of Comp Solid roller lifters .842 part #866-16 with only 4 dyno pull's on them they are like new. $300.00 plus the ride. Jim Sampica 602-448-9374

Hi, I have two BBC solid roller cams as one was installed but never ran and the other one is used. The cam cards are below for review and PM me to work out the detail as I am asking $200 OBO for the new one and $150 for the used one. Thanks

If I have a car with your basic solid color with clear coat, is it possible to scuff the clear, spray some metal flake, then spray some more clear, and then have a metalic color? I guess what I'm asking is can I change from solid to metalic? If I could do something like this I could leave the...

Brand new solid driveline 32 spline 28" long Heat treated and ready to go! Changed directions in project; my loss your gain! Paid $225 Asking $175 plus shipping Shawn 949.283.4003

2 BBC solid Roller Camshafts. Bullet Cam only ran 1 dyno session since cam had new grind done. Sraub Cam is new, only ran 1 dyno session. These Cams peaked around 6300 in my 572, a little low for what I was looking for but nothing wrong with them. $100 each, call Tim @ 916-872-0145

IN, @ .050-251 dur,lift .3840,open 24.5 closed 46.5, center line 101--- EX, @ .050 259, lift .3730, open 62.5 closed 16.5, 113 center line, 107 LSA. 250.00$ Shipping included 916-825-1514. Bobby.

Looking for a solid driveline, adapters, and tube for flywheel forward. Thanks, Steve

New in Box Clay Smith BBC solid roller cam for Gen IV. Part number R-308-8. As noted on card this is a .754 gross lift with 274 duration @.050; 308 advertised. This has never been installed, just took it out of the box for pictures. I have gone a different direction and no longer need it...

So what's the pro vs. cons of a Hydraulic Roller vs. Solid Roller Cam in a Blower Engine? Is the HP and TQ numbers really that different? The engine is a 572 with a 1071 blower at about 6.5 psi.

Custom Reground Bullet BBC Solid Roller Camshaft. Peak power near 6450 RPM. Duration @ .050 278 intake 288 exhaust. Gross Valve Lift .772 Intake and exhaust. LSA 110 Ran for one dyno session but too big for my application $100 + Shipping

New motor is in and aligned the motor and v-drive today, when setting the shaft with the lock collars should i tighten everything up or allow the shaft some play, say an 1/8th of an inch. Thanks

I have 3 sets of used Crower severe duty solid roller lifters for a BBC (396/427/454/502). They are the cutaway model. Set 1: .842" OD with std. push-rod cup. $100 SOLD Set 2: .842" OD with intake push-rod cup off-set .180" for Big Chief heads. $125 SOLD Set 3: .903" OD with intake push-rod...

Big Block chevy Isky sold roller red-zone E-Z-Roll Lifters #372-96-RH Isky rebuilt and checked. Normal bore size. Used condition good shape all rollers check good. $300.00

BBF Solid Roller Lifters, new........... Brand new Lunati solid roller lifters for Ford 385 series 429 thru 460 engine, lifter body .875 dia. (same as p/n72412-16) Summit $360.00, asking $300.00 plus shipping................. Thank You..