Search Results for ‘stuffer’

I have a Mach 1 v drive and I put all new bushings in strut, wip strut and stuffer bushing. I have a water cooled ca sale that dumps into the stuffer. Every time I put in water and run out from marina it spins the stuffer bushing with the shaft and rips my fittings off. Once it does it then I...

Nice bowl worked a bit with stuffer, taped for cradle and double drilled350+

will i gain anything if i add a bowl stuffer to my berkeley e pump on a heavy cruiser??

i purchased a nice used JG bowl with a stuffer plate already mounted in it, i have a berkeley pump with an A impellor, when i went to install the bowl on the pump the impellor is hitting the stuffer, do they make a small spacer to go between the bowl & suction housing? it looks like it needs...

What are you using on bolts to hold the stuffer in... red/blue thread sealer....anti seize/ silicone?

$50 plus shipping

I have a stuffer that I got when I bought my pump. it has all four bolts and looks to be new, pump was new so I think it was new to. Ill take 50 plus shipping. ill post pic later, thanks

HOW THICK IS IT BETWEEN THE BOWL AND THE IMPELLER?? IM MAKING MY OWN AND WANT OT GET IT RIGHT THE FIRST TIME. PLEASE LET ME KNOW. THANKS IN ADVANCE. DON

Does Any One Have A Stuffer Laying Around???? I Need Some Dimentions Off It So I Can Make One. I Need The Od, And How Thick It Is So I Can Find The Material For It. This Is The Only Thing I Can Thik Of That Would Make The Pump Not Push Water Upon Entering The Water. The Boat Floats On...

This is a New stuffer and need to sell. comes with all four bolts too.

Is that a stuffer?

Does anyone have any "R" intake stuffer grates they want to sell? The "R" intake grate uses rails (6 bolts total) instead of the square pad intake grates everyone else uses. Thanks

I have a JG bowl that has been fitted with a stuffer! The question I have is what mich. work has to be done to get the bowl to fit on my pump? Impellor,shaft,housing,ETC?:confused:

Hows it goin folks. Im sending my 12JG in for a rebuild and was curious if anyone has noticed any real gain by adding a stuffer, either in mph or increased fuel economy. In theory it makes sense but is it worth the cost? :)hand