Performance Boats Forum banner

tech

  1. Other Stuff for Sale
    ​SOLD WeatherTech Custom Fit Front FloorLiner COLOR TAN THESE CAME OFF OFF OUR 2002 YUKON, LIKE NEW THEY FIT GM CHEVY OR GMC OR Denali 1999--2007 Part Number: 440031 Accurately/completely lines the interior carpet High-density tri-extended material Rigid core strength, offers surface friction...
  2. Parts for Sale
    has less than 50 passes and only 3 passes with the $500 big dog clutches--Just like a new one-$1250 in shreveport, louisiana 318-470-1482
  3. Parts for Sale
    3 holley carbs.........$$ i have 3 carbs 1 new 2 used and 1 fast fuel tech 3 carburaters holley new 670 used 750 850 ​$300 for all 3 carbs (holley) ​sold efi fast fuel mouz 951 870-6910
  4. Parts for Sale
    Comp Cams Hi Tech push rods 4 different sets $50 each set of 8 Greenwood, CA (95635) i have 4 sets of 8 pushrods that were used for a max of 2-3 hrs run time . each time engine was rebuilt and cam swapped the rods were swapped out . they all are in Great shape .. 50.00 each set of 8 with free...
  5. GN7 On the Dyno
    When I looked into a kit like this last year, the price was outrageous. Just stumbled across this kit offered by Straub Tech. at a price I can swallow. LS bushing trunnion kits - Straub Technologies From memory, the other kit I was drooling over used Bronze bushings with "self lubricating"...
  6. V-Drives
    the lucas rules state that fuel injected boats must have push/pull fuel shutoff valve. is the valve required on EFI engines? If it is required, it would be nice to see how others have the valve mounted.
  7. V-Drives
    I have a Miller flat bottom V-drive boat. I have had it for quite some time and have kept it pretty much stock. I am in the middle of over hauling the entire boat pretty much: seats, tanks, motor, drive train, ect..... Anyways to my point, I have had a hard time finding good tech help out there...
  8. V-Drives
    I have a Miller flat bottom V-drive boat. I have had it for quite some time and have kept it pretty much stock. I am in the middle of over hauling the entire boat pretty much: seats, tanks, motor, drive train, ect..... Anyways to my point, I have had a hard time finding good tech help out there...
  9. V-Drives
    I found this the other day...had it saved for years. It's an in depth view of the rebuild of a split case box.. Laid Back Boaters • View topic - Casale V-Drive Rebuild Take a look...it answers lots of questions...
  10. GN7 On the Dyno
    This is just a little insight into what I do here almost on a daily basis and what we run into. Setting up rocker geometry for a customer. Customer sent in their heads and another brand of rockers. We did the cam and provided new Morel lifters. This is a solid roller deal with about .740 net...
  11. V-Drives
    If you got 5 min I would like to ask a couple questions. 559 389 9754 this is a cell. Thank you, Robert.
  12. Jet Boats
    February 20, 2015 Hello People The NJBA has a "New Tech Requirement: Any jet boat running a hinged nozzle must have a positive stop". :)Unsure Willis
  13. V-Drives
    I want to remove my bent v-drive strut. I used marine tech when I installed it this spring. (it was'nt bent then) Is there a preferred method to help release the bond? I am worried about damage to the hull. Thanks
  14. Other Stuff for Sale
    SOLD - 1986 550 Jet Ski (Orginal Owner) SOLD - The Wedge has sold SOLD - 550 Jet Ski $575 I am the original owner. Ski has been garaged entire life. Ski has never been in salt water. Last time out ski ran great in 1995. All stock motor has never been opened. Ski is in...
  15. Boats for Sale
    good looking boat. 1985 18' Fibre Tech Boat & 1985 Tandem Trailer. Only Includes The Following: ***No Interior *** * New Flo Coat * New Paint *2 Round Imco S.S. Polished with sending unit gas tanks. * Polished Rail Kit & Big Block Chevy Motor Mounts. * New Steering Column, Shifter& Gauges. *...
  16. PB Open Water
    My kid has an older 650 stand up ski. He is putting a new impeller in it, but the new impeller fits in the housing (right term?) a little tight. I was going to turn a little off of the OD of the impeller. Does anyone know what the clearance should be? I have seen pics where a feeler gauge is...
  17. V-Drives
    Could someone please get a hold of Nick and ask him to call me asap... Jeff Andrade' 510 915-9491...
  18. Jet Boats
    Doesn't the Ignition Problem sound pretty damn close to this thread? Who's Tim Petterson? :confused: http://www.performanceboats.com/jet-boats/135474-ignition-problem-help.html
  19. Jet Boats
    Just looking for input. I guess the reason I do is stupid or a select few Don't understand ?? Why would I buy parts and tech from the fastest people in the world of jet boat racing ??? I'm never gonna be the fastest I know that !!! At the end of the day it works for us. Any input would be great...
  20. PB Open Water
    Straub Tech is happy to announce the addition of Scott Foxwell to the company. Scott will be joining the staff of Straub Tech / Clay Smith Cams East in late February after a "Clampet" style move. Scott will be answering phones, providing tech support to Straub and Clay Smith customers, and...
Top