Performance Boats Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. V-Drives
    I have a 12 degree casale with 3/8 plate and 8 degree castle with a 1/2 inch plate why the differance
  2. Jet Boats
    how thick is the suction wall thickness at 11 oclock and 5 oclock one inch in front of the wear ring seat?
  3. Jet Boats
    I know it is here some where but My searches have come up empty. How thick should an engine plate be, 3/8" or 1/2"? Is there a specific width and thickness for the rails? Is 2" x 2" x 3/8" ok for rails? Thanks.....Hal
  4. Jet Boats
    Im installing new carpet and building a rack for my battery box and control module. I have it elivated to keep it as dry as possible but this entails screwing the sucker to the bottom of the boat. I would glass it in but how i want to lay carpet makes that tricky.. I still might depending on the...
  5. GN7 On the Dyno
    the one i removed seems to be about .035 (crushed)and the only ones in the shop are for a gen V and they seem to be about .055 (uncrushed). the old one is orange in color and has GM stamped into it so im figuring its a factory head gasket. this came from a crate mercury engine and i would have...
1-5 of 5 Results