tranny

Hello all, I've got an '08 Dodge Mega Cab that I love, but it's pushing up on 180K miles. I know that there's a life span on transmissions pushing around 7,400 lb trucks with 35" tires, particularly those trucks that tow with any regularity. So, wanting to be proactive, I want to plan when I...

In need of a Power Glide..if you have something call Mike 208 863 2975 Needs to be good.

Hey guys, A good friend of mine is about to be up shits creek anyday now when his tranny blows. He is having a hard time tracking down a compatible tranny so i thought I would check with the community to see whats out there. Were in Northern California(Sacramento to be exact) so it would be...

Merc 2 trans that was in my TRS Pantera . It worked great and never had any issues but seeings how I had it out I decided to have it completely rebuilt . That cost me $800 with heavy duty clutches and it has not had fluid put back in it yet $1000 plus shipping .

Wondering if any of you guys have any recommendations on how to clean tranny fluid (ATF4) up off asphalt? I've tried the methods I use for oil and it only made the problem worse. I know the local auto parts stores have a few products claiming to do this safely but i don't want to drop $100...

Here's the question! I have a turbo 400 in a big block chevy v-drive day cruiser. It is set up with a tranny cooler that only runs water through the cooler when the boat is moving through the water. When the boat is setting still at idol running the engine will the tranny build up enough heat to...

Any one know what it takes to mate a Lenco clutch and tranny? I got one of each and don't see how they get hooked together.

The hard parts & clutch plates are ford

http://orangecounty.craigslist.org/boa/1252655581.html the link is to a 23' daytona eliminator with a 454 and a 3 speed transmission. i tried to get pics from the guy with no luck, he said that it would cost me 20,000 to do it and then the boat couldn't handle the motor being set ahead...

i just got my new boat and lost my tranny in the process...:|err:|err. does anyone know a good tranny shop that wont break the bank to rebuild a 700R4 in a 1990 suburban 4x4 thanks jerry

Okay here is the deal. I back the truck out of the garage and fluid comes dripping out of the dip stick. What's the deal? 1999 f250 powerstroke Is their a clogged vent? I pull the dip stick and it poors out. WTF. It has been sitting

Hey guys, I am tired of tearing my interior in and out of my sanger mini day cruiser trying to figure evertything out so I want to start with the basics. Can you hear the dumb questions coming? One the sanger has a paragon gears transmission with reverse. Any research I found on it says it is...

Dumped the motor in the boat and got everything hooked up and fired for the first time on the trailer. Noticed when punching the starter button to engage the cylenoid, the prop shaft was spinning. Checked the shifter to ensure that is was in neutral (Park, Reverse, Nuetral, 2nd, and 3rd) - it...