Performance Boats Forum banner
1-15 of 22 Results
  1. GN7 On the Dyno
    Just curious what rpm/hp your getting reliably out of them ? So far I've only pushed my 555 to 6400 on limiter but that was just a quick throttle stab running "A" SS Dominator impeller with inducer and stuffer -3" FTN nozzle
  2. Parts for Sale
    Looking for a 1" rudder haveing a hard time finding.
  3. Parts for Sale
    All parts include shipping, PM with any questions or offers. Thanks Johnf Fin is 5"x4" wide $80 New Billit Shifter $50 (sold) Old Skeliton Shifter $20 2" gas caps $20(SOLD) 12" steering wheel with bezel $35 Deck lid supports (diff lengths) 1 16"-1 14-3/4" $25 Battery kill switch $25 Fuel...
  4. V-Drives
    I have a Nordic Long deck that is dismantled for repainting. The turning fin has a curve to it where it is welded to the flat metal that bolts to the boat. To me, it looks like it warped or curved when welded. Or, was it made this way for a reason? I dont have a pic of it right now, but can if I...
  5. Jet Boats
    I was doing some thinking the other day (very dangerous thing to do) and wondered if adding a turning skeg to the bottom of my hull would have more advantages than drawbacks? I'd like to make my boat (73 kona) and my new boat (74 sanger) turn and handle better. maybe a nice rudder too? What do...
  6. V-Drives
    Just picked up a flatbottom(minus motor) and there is some work that needs to be done to the bottom. Anyone have suggestions on how to flip it over so its easier to work on. I would appreciate it. Thanks in advance
  7. V-Drives
    Hey guys, I have noticed that alot of V-drive flats seem to turn much better than my Hondo Flat...I have a fair sized rudder but also a much larger skeg than some I have seen in pics. Mine is about 9" deep at the aft end and about 16" long... Any suggestions as to how to address this problem...
  8. V-Drives
    whats the correct process in turning my motor around? so that it runs off the crank and not the fly wheel. got the motor out for rebuild. just need to know what modifications need to be made thanks Brendan
  9. Parts for Sale
    Bowl is in good shape, Buyer pays shipping costs. $125.00
  10. PB Open Water
    I think there are a few pool guys here. Lots of pool owners as well. Been using Sun brand conditioner in all my pools until they stopped selling it and decided to use the cheap Chinese stuff in lew of the very expensive Hassa brand. Superior Pool prod. in Grand Terrace offers only the 2...
  11. PB Open Water
  12. V-Drives
    I heard Circle boats have a turning fin or turning fins. But I have never looked close enough at circle boats to see any turning fins or where one would be mounted on a boat for Circle boats. So what I am asking here is, #1 where would a turning fin be mounted for a Circle boat? #2 I know...
  13. PB Open Water
    I moved away from Havasu about 2 months ago and I hear, a lot of business' are gone and a lot of people are getting out....
  14. V-Drives
    Any of you guys have a v drive in a boat with a pretty deep v angle? How does it turn? Does it have a turn fin up front somewhere? Wags
  15. Jet Boats
    I'm determined to use my top-mpont 3 bolt Prestolite starter...and I saw the pelow pic and my feeble little brain started to think. So I'm thinking (smell something burning)...WHY couldn't I cut my current 3-point bell housing (see cut line) and weld a rear plate to it thus getting a rear bell...
1-15 of 22 Results