v drive

71 Hondo flat bottom v drive Cassale w/ whirl away 468 BBC 10:1 comp MSD with box Air gap manifold Holley 850 Merlin 3 heads Mildon Pan Very reliable and set up correct. Good floor and stringers. New Imco tanks need to sell asap 5 obo

Cleaning out my garage.... I have a Casale V Drive. The gears are good 18%, and the drive angle is 12 degrees. 22" mount plate. Bearings are decent, only needs a gasket set. No whirl -away. In / out box. $300. Call or text Dale @ (661)487-3369

1967 Long Deck Mandella **Price Drop** I'm putting myself through college and sadly it doesn't leave me much time anymore, so I'm selling my Mandella. I've had the boat for a few years, and with lots of help restored it. The boat comes on the trailer as seen. If you have any questions feel free...

For Sale, My father built this boat over a coarse of 5 years, every nut and bolt was remove and replaced. The motor is a high nickel bow tie Chevy race block. The motor was built by Tim Morgan in Walnut Creek CA. The heads were done by Brad Anderson. The Carbs were done by the carb shop. Paint...

I am posting this for a friend. He is selling his 1971 Hondo 17'10" v drive flatbottom. Boat has fresh gel coat, a casale box with 18's and a whirlaway, 2 blade 15 pitch prop (unsure of diameter). Motor is a 468 bbc with a solid roller, big oval port heads with stud girdles, truck rods with srp...

1977 V Drive 1977 nordic day cruiser

Lake Ready 21 ft. Spectra V-Drive River Cruiser. Very desirable hull design. Nice triple blue over white gel coat. Matching Bimini top with quick release brackets. Triple axle trailer with new wheels, tires, bearing buddies, and center axle electric brakes. Hull has a fresh Crusader V drive box...

I bought a 1965 Sanger wood deck flattie I believe to be a circle race hull. motor sit foreward not like a standard v drive and from what I can tell it is a SNOUT? drive. I have a 454 to put in it but it is externally balanced, I see Glenwood sells a a crankk hub that goes in place of the...

this is a Howard roundy round hull in good structural condition< stringers, bottom and rest are all good , paintis good but needs some tlc. this hull will come with trailer ,waterlog,shaft, prop, all steerage components, cavitation plates and mostof the turn buckles, with the foot petals...

looking to trade my 1980 eliminato r25' with 350 sbc and 260 mercruiser outdrive for a v drive daycruiser. motor has been replaced and has about 25 hours on it. outdrive was serviced.interior is do able but showing age. origional gel coat is nice and polishes up sweet. there are a few scratches...

I HAVE A COMPLETE SET OF MOTOR MOUNTS FOR A BIG BLOCK FORD. THIS IS TYPPICAL JET BOAT STRINGER MOUNT APPLICATION. THE FRONT ONE HAS A WELD ON IT(SEE PICS), AND WAS LIKE THIS WHEN I BOUGHT MY BOAT 6 YRS AGO. NEVER HAD A PROBLEM, NOR DO I SEE ONE. FIRST 225.00 TAKES THEM. DONT CALL AND LO-BALL ME...