Performance Boats Forum banner

water

  1. NEED a Rare BB OLDS water pump timing cover engine mount

    V-Drives
    I will also post this in the parts section but I figure there may be a bigger chance of someone seeing it here Hopefully someone has one hanging on a wall or in a pile or still attached to a relic It is a single piece combination Water Pump cover, Timing cover and Engine mount like the one in...
  2. The 2019 Blue Water Resort & Casino "Parker Enduro" Presented by Nick Rose Insurance

    Races and Boating Events
    The 2019 Blue Water Resort & Casino "Parker Enduro" Presented by Nick Rose Insurance The Blue Water Resort & Casino Parker Enduro/Kevin Taylor Memorial Race Presented by Nick Rose Insurance Nordic & Hallett Boats, Advanced Oilfield Services, RaceTec Pistons, Absolute Speed & Marine, Mike Brink...
  3. [Pics] Ultra 21' takes on water only when moving - I'm stumped!

    Outdrives
    Hey all. I have a 2002 Ultra 21' with a 496 Mag and Bravo One. I've been banging my head trying to figure out why it takes on water. At first I thought the rear vents were taking on water via the wake when I come off plane but I confirmed that is not the case today by temporarily blocking them...
  4. [Question] Water Pressure - Help

    Jet Boats
    So I took my new beast out for my maiden voyage today and promptly overheated... I think. Have a look here: Notice the two vinyl/reinforced tubes coming up either side. That's my "water in" from the pump. There is a valve in the back at the pump, which I opened. When I was sitting and...
  5. [SOLD] Nicson Water Pump

    Parts for Sale
    I am selling a Nicson water pump. Works great. One is complete and one just has the body. This sale will be complete with the two. Asking for $100.00 plus shipping or can bring to April races in Parker and Wild Horse Pass
  6. [Announcment] D21 Enterprises Water Pump Impellers

    V-Drives
    D21 Enterprises is now stocking water pump impellers for: Jabsco 3/4" Neovane V-505, V-755, H500 and H-750 1" Neovane V-105 Mike Kuhl River Rat Nicson 3/4" Magnaflow 1" Magnaflow We have the cheapest price's around. Thanks, Phil
  7. ford 429 460 water pump questions [help]

    V-Drives
    hey fellas help me out i wanna put a really nice bbf in my boat but i cant find a timing cover to mount a water pump .pictures would help also thanks
  8. water volume good?

    GN7 On the Dyno
    XR Bravo, imco lower,Hey guys looking at force feeding my inncooler with my outdrive will it be sufficient? Going to run it up to sand strainer, psi relief, threw innercooler then dump it. Thank you
  9. Water Reversion 300XS Solved

    Outboard Church
    Preface: If you own a 300XS Outboard motor and are running twins or single in the triple digit realm you will have water reversion issues. What is water reversion? It occurs at high speed [typically 85+ MPH] when the head water from the motor is dumped out onto the wingplate. Upon exit at...
  10. WTB bassett water setup(lines) jet 454

    Parts for Sale
    bassett water setup(lines) jet 454 I ordered new from bassett..boy those things are f#$*@ exspensive..better then melting my seats...
  11. WANTED water lines

    Parts for Sale
    jet type face forward v drive back
  12. WANTED jetboat bassett water lines t

    Boats for Sale
    I have old style bassett short collector headers...lines must face forward..v drive lines face back....
  13. [SOLD] wtb mike kuhl water pump

    Parts for Sale
    looking for water pump hellllpppp
  14. [SOLD] Kuhl water pump on cover bbc

    Parts for Sale
    Mike Kuhl in Very nice shape for stacking pumps with injection or just a nicer looking pump that doesnt stick out as far! Has the drive spud too. Buy it with confidence from the jErK $450 for both shipped! Front cover is 2 piece flat polished aluminum and is the same height as a regular...
  15. [Pics] GN 76 Rampage.....first time on water in ~25 yrs

    V-Drives
    First time on the lake went well except for a bad starter and blowing out the mufflers(in the Lake). No leaks and the injectors worked well(even idled!) My "Sincere Thanks" to Jim Lange who helped me rig the boat and who built and set up the engine & vintage Crower injection. :thumb: "Jim...
  16. wtb mike kuhl water pump

    Parts for Sale
    Looking for kuhl or r&b water pump and 3 7/8 blower snout [email protected]
  17. Eng. Parts wtb water pump/timing cover

    Parts for Sale
    Looking for water pump and timing cover for bbc please
  18. water pump mount for comp belt drive

    Parts for Sale
    mount for cam driven water pump using comp belt drives (neovane or magnaflow) for bbc. mounts come complete with stand offs and hardware. all mounts are polished.$125 for the 4 hole mount and i am working on a 6 hole mount. contact shane @ Advance Fab 661-343-3018
  19. Tuning water pressure with a shut off valve

    Jet Boats
    I know some people are doing the pressure regulator stuff now...BUT... using the shut off valve method, how do you 'tune' your water pressure?
  20. Bad water spots

    Paint and Fiberglass Repair
    How do you remove what look to be like water spots, but are more like road grime spots. I have a few spots of these under the rub rail and down low on the boat. I have tried vinegar, clay bar, and hot sauce. I had a little luck with the clay bar but very time consuming. I am thinking color...
Top