Im still having the issue I posted about earlier with a hot spark then it dwindles or doesn't spark at all. Question, has anyone ever diagnosed a bad coil wire that prevented the engine from firing? I can get one or two cylinders to fire but it just cranks after that. Ive replaced the batteries...
I have two working 4 wire solenoids for sale, these are the older version that are no longer made i bought them for my Sunsation but then realized i had the newer three wire set up. I did test them using the test set up on the corsa web site and they both work. $160.00 shipping included in the...
I have a pair of 4-wire solenoids in good working condition for sale. I was told by Corsa I had a 4-wire harness...you can't but these new anymore, so I jumped for the chance to buy these. I have a 2-wire harness. I only want what I paid $112.00 and I will include shipping. I have a picture if...
Turnbuckles got to be safety wired in ABPA? does this require drilling them in some way?
"marine transmissions require safety wire set screws on prop shaft".... is a marine transmission a Casale drive?
anybody got any pics of this stuff?
About a year ago I routed my charging wire from the alternator directly to the starter. It used to run to the terminal block. My question is can this be fouling plugs and if so do i need to go hotter or colder. I never fouled a plug before i made the change, now it fouls one or two plugs...
So I'm located in the south suburbs of IL. I have a 1989 Hardin Marine Formula 454 big block. just re did all the interior and was looking to re wire the boat. I know it's not the season to work on a boat but if someone had a garage i could bring it to them. I was planning on doing it myself but...
What is the consensus on securing the front bolts of a buzzard catcher to a blower?
I don't even want to think of the damage if they were to come loose. :shock: I'm thinking of studding the blower to the hat and using safety wire for the nuts behind the butterfly's.
What do you think ??
Whats the best way to wire speakers/subs/amp?
Got a new boat with a good amount of speakers, just dont know if its working to its fullest potential.
It has 2 xplod 4 channel amps, 2 xplod 10" subs, 4 6x9's, and 4 6's.
Each amp has 2 6x9's on a channel, 2 6's on a channel, 1 sub on a channel...
getting ready to wire the boat what are marine color codes? i got a
fuel gauge -
water temp -
oil pressure -
volt meter -
bilge pump -
cigarette lighter -
thanks in advance and if possible maybe a guess at about how much ill need of each its an 18' jet boat with a bow tank
Im installing a new sys. in my 21 Daytona (copy)
Im installing 4 Kappa 6x9's and a Kappa four amp }:<)
Im also installing a new 120amp alt.
My quistion is what size of alt. wire should i run???????
Im running 8ga now is this fine or should i step it up???
things that will be running: