Performance Boats Forum banner

worth

  1. V-Drives
    Found this 1970 Rayson Craft rotting under a tarp in the weeds this weekend . I drug it home it needed to be rescued.
  2. V-Drives
    Looking at maybe checking this out. Anyone know anything about it? only info is it 1971, and looks like SBC
  3. GN7 On the Dyno
    I ran across an old Hondo flat that's in pretty bad shape. The guy who has it wanted an arm and a leg for it, I laughed a little at the price. He thought he was going to get my attention back by saying "It comes with a 392 Hemi". I haven't questioned about the shape of the motor or what mods it...
  4. Jet Boats
    Hi Guys, I am picking up a 77 supersonic?? with a blown up 440 in it and am wondering what the market is out there for 440 parts? Seems to me like the block is the only thing damaged. everything else including all bolt on accessories will go. Ill have more info on it tonight when I get home...
  5. PB Open Water
    With the water level ridiculously low at Lake Mead, is it even really worth it to plan a boating weekend there? Was thinking about planning a trip to Vegas for a show and then hitting the lake one or two afternoons in May. Main concerns would be launching and worry about random shallow spots...
  6. Jet Boats
    Almost here and worth every minute of waiting October maybe After a ton of research The work began a few months back and it's almost here....... This was my sneak peek :)Unsure Sounds like it might get done sometime in October fingers crossed, long journey.
  7. Bob Teague
    I am an outboard guy so I need a little help here.. I have an old boat that I inherited that the restoration process had just begun on. All that had been done so far is the engine, so it is really the only thing of any significant value. The old boat is in working condition, however. The engine...
  8. Boats for Sale
    I have a 1989 welded aluminum vee bottom race boat, complete with the trailer. The hull has only 180 hours on it and is undamaged. Completely plumbed with stainless hose and anodized fittings. Full instrumentation and everything works. Dominator pump with an Aggressor A3 impellor. Droop snoot...
  9. V-Drives
    Looks to be some kind of Rayson Craft, Or? Any ideas? I need another boat like a hole in the Head. any one reconize this boat? it is in the pan handle of Florida.
  10. V-Drives
    Got an email and these pix from Idaho...20 years in storage...:))THumbsUp Owner wants to sell but we got no idea on value...:confused: Prolly $8k to restore the interior and shine it up...
  11. Jet Boats
    This thing is 15-20 mins from my house. Haven't called the guy yet. From the pictures and description, WHAT'S IT WORTH? Wouldn't mind having a second boat. 1981 Tahiti tandem axel 460 with headers berk drive 19' Tahiti 460 jet boat
  12. Boats for Sale
    77 Southwinds Fresh 460, Tunnel ram, dual carbs, full MSD. fresh pump, built by JP marine, all new cables, new guages, fresh paint on the boat and trailer. Needs seats, carpet and bunk carpet, then a good cleaning. Buy as is $5k obo or as I pick away at it the price will go up a little bit. A...
  13. Jet Boats
    20' Youngblood: How much is it worth? Clear title... Not sure of the year but it is a solid bare hull with no hardware, gauges, etc. Thanks! I've wanted one of these for years!!! How do you think a large cube turbo LS motor would work? (:)eek(:)
  14. GN7 On the Dyno
    I have an older Glastron with a 454 7.4 litre/Bravo 1. Its one of two models of micro (under 24ft) power boats Glastron made for a very brief time. I am pretty sure its a 4 bolt block; I was told it was when I bought it, I'm going to check here in the next week or so. Its a turn key 60mph...
  15. Jet Boats
    So, I have a chance to grab a 73 sleekcraft mini-daycruiser, with a 454, jet drive. It needs a little interior work and a drive cable. I can get it for 1500, running. How hard is it to replace a drive cable, and how costly? Heres a picture of the boat. can anyone tell me what kind of jet...
  16. Jet Boats
    I have a 74 Rogers Bonneville that runs hard to 95 mph. I can't sell it and get enough for all that I've invested especially the time I have into it. I'm thinking I'll sell it with everything removed except the stock intake and suction pump housing. I'm keeping the $1k pump shaft I just bought...
  17. GN7 On the Dyno
    Just added a Tall deck 427 truck block to my core pile. So is it worth the trouble to do all the clearance grinding to fit a 4.25 4340 forged crank and H beams to get a longer rod and better piston ring and pin package? :hmmm: This build would be for 650hp no spray pump gas for my Sanger Mini...
  18. PB Open Water
    I will be making a trip to Dallas/Ft Worth soon and would like to check out any performance boat shops in the area if I get any extra time. Any sugguestions?
  19. Jet Boats
    I'm about to remove these polished Panther exhaust manifolds in place of some BBC headers and wanted to know what these may be worth. Someone told me they were sort of a rarity and that in the excellent conditon they're in that $1200-$1500 would be a fair figure. No idea if this is in the ball...
  20. Jet Boats
    Not sure what to pay for this boat its a ranger everything looks to be in great condition.motor was rebuilt by waynes in riverside(460ford) trailer looks great .overall very clean boat
Top