Performance Boats Forum banner
1 - 7 of 7 Posts

·
LAID IN MEXICO
Joined
·
750 Posts
Discussion Starter · #1 ·
anyone need some very nice 12* Casale cases, or some very nice .09 12* gears. make me an offer.

just pulled it apart to get some parts for another v drive. it was a virgin, never touched. also have the plate from a sanger flat, 1 1/4" input shaft, and drive shaft hub. these cases are already set up for a double row bottom bearing.

not lookin to get rich off this stuff. if you need it, tell me whats fair, and ill get it to you.

parts are in so cal. Nelson 805-320-1528
 

·
LAID IN MEXICO
Joined
·
750 Posts
Discussion Starter · #3 ·
missing

i took the bearing caps, the bolts, the in/out housing, the lower shaft, and the sliding dogs. i have the in / out housing and bearing caps from my 10*, that need to be cleaned up, but are useable. also have the top shaft and output shaft from the 12*. have the bolts from the 10 too, just a lil rusty.

so with a bottom shaft, a sliding dogs thingy, and a rebuild kit, you could have a good 12* only missing the two parts.

i just took the better looking stuff, and the lower shaft / dogs to help build my new 10*

i think the missing parts, are about 150 to replace. bearings and gaskets are not too much either. the bearings in it are prob ok, just a good time to freshin up.

make me an offer, dont be bashfull:D
 

·
punk ass kid
Joined
·
524 Posts
Would you take $100 and let me come get it? Kinda interested in just the gears but exra parts never hurt anyone. Let me know....

Thanks, Ryan
 
1 - 7 of 7 Posts
Top