Performance Boats Forum banner

1 - 16 of 16 Posts

·
Registered
Joined
·
520 Posts
Discussion Starter · #1 · (Edited)
I hate to do it, but here we go......
PARTING THIS MOTOR OUT! HERE IS YOUR CHANCE TO MAKE OFFERS ON ANY PART IN OR ON THIS MOTOR BEFORE I PULL IT APART AND LIST EACH PIECE. REASONABLE OFFERS ONLY!!!!!

Polished Dart 320 heads ported by Jim Guthrie
Moon head temp gauges
MSD distributor with wires
Moroso Vac pump with relief valve relief
Crowed enduro Stainless Rocker arms
Comp cams belt drive
Stud Girdles
Clay Smith Cam. Specs to buyer
Eagle Rods
Pair of Chuck Nutten 1050 Dominators with Chrome fuel bowls
Holley 4 port regulator with gauge
Polished Edelbrock Tunnel Ram intake
Gm forged Crank
Fluidamper
Je pistons 14:1
477ci
Gm 4 bolt block filled
Made 796.6 on Gearheads very conservative dyno @Smith-Fair performance in Atlanta
Only 30 passes since freshened and Dynoed. Have dyno sheets
Got new Roller lifters,Valve springs, Rings, Cometic head gaskets, Mains, Rods, and Cam bearings at freshen up.
Keith 903.742.1178
Reason for selling is I sold the boat.
This motor went 8.80s in Tunnel Vision Top eliminator CP jet boat on bare motor!!! (NJBA)
 

Attachments

·
Registered
Joined
·
2,676 Posts
Now you have to put this up for sale. Just after I spent a small fortune on mine. Nice motor great price :))THumbsUp
 

·
Registered
Joined
·
415 Posts
Polished Dart 320 heads ported by DNE motorsports
Moon head temp gauges
MSD distributor with wires
Moroso Vac pump with relief valve
Comp Cams Belt Drive
Comp Stainless Rocker arms
Stud Girdles
Clay Smith Cam. Specs to buyer
Eagle Rods
Pair of Chuck Nutten 1050 Dominators with Chrome fuel bowls
Holley 4 port regulator with gauge
Polished Edelbrock Tunnel Ram intake
Gm forged Crank
Fluidamper
Je pistons 14:1
477ci
Gm 4 bolt block filled
Made 796.6 on Gearheads very conservative dyno @Smith-Fair performance in Atlanta
Only 30 passes since freshened and Dynoed. Have dyno sheets
Got new Roller lifters,Valve springs, Rings, Cometic head gaskets, Mains, Rods, and Cam bearings at freshen up.
Keith 903.742.1178
Reason for selling is I sold the boat.
This motor went 8.80s in Tunnel Vision Top eliminator CP jet boat on bare motor!!! (NJBA)
.

Actually those heads were done by Jim at Jim Guthrie Racing!!! Unless you had Dave freshen them up....
 

·
Living in a cage of fear
Joined
·
16,464 Posts
also is this strictly a drag motor? cause i like to ride in my boat
If the block wasn't filled I'd have a check on the way right now.:))THumbsUp
 

·
Registered
Joined
·
374 Posts
.

Actually those heads were done by Jim at Jim Guthrie Racing!!! Unless you had Dave freshen them up....
Steve , I'm sure your correct on the heads. Aint she purdy ! Motor is still in excellent shape just like it was when it left your driveway. Perfect combination & well kept.
 

·
Registered
Joined
·
415 Posts
.

Actually those heads were done by Jim at Jim Guthrie Racing!!! Unless you had Dave freshen them up....
Steve , I'm sure your correct on the heads. Aint she purdy ! Motor is still in excellent shape just like it was when it left your driveway. Perfect combination & well kept.
Ya I love that motor sound bitchen and runs strong I miss it...
 

·
Registered
Joined
·
520 Posts
Discussion Starter · #13 ·
Parting out

MAKE OFFERS ON PARTS. REASONABLE OFFERS ONLY!!!!Keith903.742.1178
 
1 - 16 of 16 Posts
Top