Performance Boats Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
54 Posts
Discussion Starter #1
So I just bought a 19' Daytona and it has the balsa wood floors. The problem is the resin or whatever in spots looks bad and I would like to restore it. I know there was at least one thread on this but I cannot find it. If anybody can give me some insight on what direction to go and what I need to buy that would be great.
 

·
Registered
Joined
·
176 Posts
So I just bought a 19' Daytona and it has the balsa wood floors. The problem is the resin or whatever in spots looks bad and I would like to restore it. I know there was at least one thread on this but I cannot find it. If anybody can give me some insight on what direction to go and what I need to buy that would be great.
Eliminator used a product called Duratec Hi-Gloss Clear.It's easy to apply; we would just clean up the area with some 80 grit paper,brush it on, then tape a plastic cover over the deck to keep dirt and dust out.
 
1 - 3 of 3 Posts
Top