Performance Boats Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
5,838 Posts
Discussion Starter · #1 ·
Im taking the benches out and putting two bucketseats in the boat. I wanna mount the battery in the center where the back seat is.... Anyone have some cool pics of what they made.
 

·
Registered
Joined
·
269 Posts
Mc. your boat is sick.

Here is my mount. It is not in the middle but it will give you an idea of how to make a hold down and such. This is made from simple home depot alum. 1/8" thick flat and angle just along with some turned bushing all tigged together.
T.J.



 

·
Glendale Arizona
Joined
·
2,368 Posts
Mc. your boat is sick.

Here is my mount. It is not in the middle but it will give you an idea of how to make a hold down and such. This is made from simple home depot alum. 1/8" thick flat and angle just along with some turned bushing all tigged together.
T.J.



Another home made special. Not as pretty as TJ's. I can't weld alumium so had to bolt it together. It aint pretty, but it's sturdy.



 

·
Registered
Joined
·
325 Posts
That is alot of work for a boat you're selling.
Or are you keepin it?

Patton Steel in Ontario on Mission Ave. just west of Grove.
About 15 min. from the 60/57 interchange.
45 minutes if you try to leave at 4pm:)st traffic sucks!
 
1 - 11 of 11 Posts
Top