Performance Boats Forum banner

Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
233 Posts
Discussion Starter #1 (Edited)
***Selling for a friend***

Ran this motor in my drag hydro putting the money towards a turn key drag hydro. This motor has 12 passes on it. Ran last year world finals in chandler best time was 8.95 @ 129mph. Also planted 8.94, 9.0, 9.1(have time slips) ran flawless. This motor has a 454 4 bolt main,, bme alumnium rods, je forged dome racing pistons with 0 gap rings, 4.25 eagle forged steel crank, 088 hi per heads, enderle 80 a fuel pump, millings hi per oil pump, v-drive 10 qt oil pan, enderle bird catcher with new barrel valve(comes with several pills), victor jr tunnel ram, 3" polished alumn spacer, hitachi racing starter, new valve springs, roller rockers, cam is a 625 lift, hunt racing magneto, all braided fuel lines, rewarder zoomies, 13 to 1 compression, have some extra bbc parts will throw in including a 725 lift cam. Motor pushing 1000 hp. Has a very small oil leak around the rear main. Set up for alcohol. Serious inquiries only. Please call (480) 766-1374 Doug

Asking $7500.00

The engine is located in Phoenix AZ.
 

Attachments

1 - 1 of 1 Posts
Status
Not open for further replies.
Top