Performance Boats Forum banner

1 - 20 of 23 Posts

·
custom member
Joined
·
466 Posts
Discussion Starter #1 (Edited)
Looks like my motor just went another way. (stroker instead)

So here is what i have.

Mark 4 2 bolt block fresh from machine at .030 over, Magged, Line honed and cleaned $ 250

468 Forged rotating ASSEMBLY. Factory 7416 forged crank .010rod and .010 main- Bushed 7/16 dimple rods with new hardware - Arais forged dome pistons ( will yeald about 10.5cr with 118 heads)
I have the flex plate and balancer and this is balanced ready to go. Barry can verify this as i bought the assembly from him!- $700

Ported 049 heads super clean with new stainless 2.30 / 1.88 valves - $400

if nothing sells im building another motor!
 

·
custom member
Joined
·
466 Posts
Discussion Starter #2
Looks like my motor just went another way. ( 498 instead)

So here is what i have.

Mark 4 2 bold block fresh from machine at .030 over, Magged, Line honed and cleaned ( i have a dial bore gauge to verify) $ 250

468 Forged rotating ASSEMBLY. Factory 7416 forged crank .010rod and .010 main- Bushed 7/16 dimple rods with new hardware - Arais forged dome pistons ( will yeald about 10.5cr with 118 heads)
I have the flex plate and balancer and this is balanced ready to go. Barry can verify this as i bought the assembly from him!- $800

BBC crower i beam rods with arp studs-$200

Brand new arp Main stud kit @ bolt $50

Total Seal ring kit 4.280 bore $75


All prices are OBO and if nothing sells im building another motor!
all pms replied!
 

·
Registered
Joined
·
176 Posts
I'd be interested in the block maybe if I was closer..what would you take for it shipped out..I live in the 74110 area code. matters how much shipping would cost I guess.
 

·
custom member
Joined
·
466 Posts
Discussion Starter #6
Pm replied. Shipping would prob break the deal. Truck freight can be expensive. Unless u know someone coming west !
 

·
Registered
Joined
·
3 Posts
is Mark 4 2 bolt a 396? or 454? sun valley ca

Looks like my motor just went another way. (stroker instead)

So here is what i have.

Mark 4 2 bold block fresh from machine at .030 over, Magged, Line honed and cleaned ( i have a dial bore gauge to verify) $ 250

468 Forged rotating ASSEMBLY. Factory 7416 forged crank .010rod and .010 main- Bushed 7/16 dimple rods with new hardware - Arais forged dome pistons ( will yeald about 10.5cr with 118 heads)
I have the flex plate and balancer and this is balanced ready to go. Barry can verify this as i bought the assembly from him!- $800

BBC crower i beam rods with arp studs-$200 SOLD

Brand new arp Main stud kit @ bolt $50 SOLD

Total Seal ring kit 4.280 bore $75 SOLD


All prices are OBO and if nothing sells im building another motor!
is Mark 4 a 396 or 454?
 

·
custom member
Joined
·
466 Posts
Discussion Starter #9
MK4 could be either one, but I believe this motor is a 454 .030 over.
Thanks for the help. You are correct it's a 454 .030 over.

Sorry I've been super busy and to be honest forgot I had this stuff for sale. I still have all of this! Make offer if interested. It's just collecting dust!
 

·
Registered
Joined
·
8,169 Posts
468??

Thanks for the help. You are correct it's a 454 .030 over.

Sorry I've been super busy and to be honest forgot I had this stuff for sale. I still have all of this! Make offer if interested. It's just collecting dust!
So the 468 stuff, (454 +.060) rotating assembly is for a different project?? Or is it all for the .030 over block? (4.280 x 4.0 = 460 inches)...... (4.310 X 4.0 = 468)
Ray
 

·
custom member
Joined
·
466 Posts
Discussion Starter #12
So the 468 stuff, (454 +.060) rotating assembly is for a different project?? Or is it all for the .030 over block? (4.280 x 4.0 = 460 inches)...... (4.310 X 4.0 = 468)
Ray
block is 454 .030 over ie 460

rotating assembly is 454 .060 over ie 468

bought the block and then went looking for the rest and came across the rotating assembly . only bad news was it was 060 over pistons. so i was gonna re-bore to fit but i dont need it anymore! i built a 496 instead!
 

·
Registered
Joined
·
8,169 Posts
Ratating assembly

That is a great price for the 468 stuff!!! Good luck in finding it a good home...
Ray
 
1 - 20 of 23 Posts
Top