Performance Boats Forum banner

Status
Not open for further replies.
1 - 20 of 38 Posts

·
V-Drive 4 ever
Joined
·
1,810 Posts
Discussion Starter #1 (Edited)
BBC Mechanical fuel pump 7-9 lbs 172 GPM used in good shape 100.00

Autometer gauges New opened box but never used still sealed in package ..

5421 Autometer oil pressure Liquid filled.. paid 80 sell for 60.. SOLD!!!!!!!!

Autometer 5433 Water temp with 12 foot fixed line Liquid filled.. New 135.00 sell for 85.00.. SOLD!!!!!!

Located Near Sacramento Ca 530-333-1047 Bill
 

Attachments

·
Registered
Joined
·
795 Posts
25 over 10* Gears

Are your 10* 25 over gears of the lightened variety?
 

·
V-Drive 4 ever
Joined
·
1,810 Posts
Discussion Starter #3
Are your 10* 25 over gears of the lightened variety?
Pretty sure they are standard gears not lightened.. I will get pics of them when I get back down to the city.. they look new tho very little use on them tho
 

·
Awsome Member
Joined
·
65 Posts
???

Would you possibly be selling the oil pan and pickup, if so what gen BBC are you running?
 

·
V-Drive 4 ever
Joined
·
1,810 Posts
Discussion Starter #6
im going down today and will pick up all the parts I have that im gonna be getting rid of so I will update this tonight when I get back.. as for the opil pan and pick up.. I was planning on selling it with the boat..
 

·
V-Drive 4 ever
Joined
·
1,810 Posts
Discussion Starter #8

·
Registered
Joined
·
14 Posts
Manley Valve springs with Titanium retainers Used not a lot of time on them 221447P-16 .. Pic below has all specs of them... these were used on a .808 lift solid roller cam

Casale 10 degree Gears 22% Lightened like new shape 250.00
Aluminum Timing Cover BBC gen IV 20 bucks


Reher Morrison Custom grind 4-7 swap cam will have to get specs on it but its like a .808 lift int and 780 ext. and 114 lobe separation will have to update duration later ..was used in Steve Casners Dragster 555 inch Dart engine running alcohol on a single dominator and made 1091 hp 200.00


BBC Carter 180 GPH Mechanical Fuel pump Anodized blue . new 249 at summit 160.00 with maybe 2 hrs run time

Located Near Sacramento Ca 530-333-1047 Bill
As per our deal last week...I'll take the gears. LMK where to send payment.
 

·
V-Drive 4 ever
Joined
·
1,810 Posts
Discussion Starter #15 (Edited)
Webster stud girdles BBC Dart head or Merlin.. 180.00 New used for a few hours paid about 300 for the pair with Poly Locks

All my parts are almost new with a few hours run time..
 

Attachments

·
texassst
Joined
·
43 Posts
PM Sent


Pair of Dart Iron Eagle BBC Heads 345 cc runners.. Manley Severe duty intakes 2.30 , Enconele Exhaust valves 1.88.. springs are set up for Solid roller cam 720 lift.. titanium retainers.. I had these heads built for my Blown Gas engine and have about 4 hours run time on them.. have about 2800 invested to build them 1500.00 ready to bolt on and use

Webster stud girdles BBC Dart head or Merlin.. 200.00 New used for a few hours paid about 300 for the pair with Poly Locks

Set of Roller rockers for BBC 1.7 ratio in great shape.. nopt sure brand but they look like comp cams pro magnums 140.00

solid roller lifters in great shape 140.00 will have to check brand as well ..

All my parts are almost new with a few hours run time..
 

·
Registered
Joined
·
120 Posts
here's the grind #'s on the cam R314/475s
324/450
10-10 714 112 S 3782

I don't remember the Duration I was told.. I know this was the Cam Steve Casner ran in his 565 inch dart engine in his dragster and has run a 7.41 @189 .. that is a Reher Morrison grind
i will take the cam and timing cover give me a call when you get a chance thanks...
 
1 - 20 of 38 Posts
Status
Not open for further replies.
Top