Performance Boats Forum banner
1 - 14 of 14 Posts

· JRPM/e-PerformanceMarine
Joined
·
1,458 Posts
Discussion Starter · #2 · (Edited)
I have a few more in different stages of completion. Let me know what you need ! I am also offering free install on all the above pumps.

Thanks
Jim
928-770-4394
Please leave message if I don't get to the phone, I am glassing a boat today.
 

· JRPM/e-PerformanceMarine
Joined
·
1,458 Posts
Discussion Starter · #5 · (Edited)
I would sure like to move these pumps. The two Berkeleys are used but in perfect working order. They have been fully torn down and cleaned, they also have been tightend up for improved performance. The Dominator has a 17-4 shaft, "A" aluminum impeller shouldered wear-ring, all new seals and gaskets. This would be a good pump for a serious river hot rod or NJBAs River Racer class boat. I am throwing in free install on all the pumps, that is a $280 savings, plus a half a days labor. These prices are with exchange, or a $250 core charge will be added. All the pumps have a fresh white paint job that has two coats of clear.

Thanks
Jim
 

· JRPM/e-PerformanceMarine
Joined
·
1,458 Posts
Discussion Starter · #6 ·
This is a pritty good offer, I have only had two customers take me up on the free instal, that was bacck when I had 6 pumpd. I know you guys know folks that need a pump.

Thanks
Jim
JR Performance Motorsports
928-770-4394
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top