Performance Boats Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
58 Posts
Discussion Starter · #1 ·
So this past saturday at the lake my boat took on a few to many rollers while i was pulling it off. By the time it was out of harms way, the place diverter pump was under water and now the electric motor does nothing. So I guess my question is, have any of you guys ever replaced the motors on the pumps. Is it hard, and if not could you point me where to get replacment parts.
 

·
Premium Member
Joined
·
400 Posts
just had mine completly disassembled...not hard at all.just take your time ,check for a blown fuse first.take the solenoids off and give power from a spare battery directly to the motor to make sure its junk before you spend that cash.also look out for junk diodes... maybe try a trim switch maybe the diodes are bad and just not letting the motor get power
 

·
Registered
Joined
·
40 Posts
If you like to do it yourself , it's easy. I did mine 4 years ago and it still workin like a champ. If you need help or have question , just ask..
 
1 - 4 of 4 Posts
Top