Performance Boats Forum banner

Status
Not open for further replies.
1 - 2 of 2 Posts

·
Distinguished Member
Joined
·
5,775 Posts
Discussion Starter #1 (Edited)
This is for a flywheel aft or front facing BBC (balancer driven). Came off my Bezer and is about as nice a left turn wet sump oil pan as you can get. 1.75" kick out with scraper, built in windage tray and trap doors for optimum oil control in a left turn racing application. Cleared 4.375" stroke with steel rods no problem. Comes with pick up and oil pump shown. Never had a bomb go off in it although I did weld up a tiny crack on the inside near the oil drain (see pic). This is a very nice pan but sold the Bezer and don't plan on another circle boat anytime soon.


007.jpg 010.jpg

012.jpg 006.jpg

009.jpg 008.jpg

005.jpg 004.jpg
 

·
Distinguished Member
Joined
·
5,775 Posts
Discussion Starter #2
Bump... now includes the oil pump since I can't get around it well enough to cut it off. It's a decent race quality pump that was orginally in our Super Stock motor...
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top