Performance Boats Forum banner

1 - 13 of 13 Posts

·
Registered
Joined
·
3,867 Posts
Discussion Starter #1
Who has ever dealt with fast chip out of Oklahoma? I built a friend a engine and told him it would NEED to be re-chipped for a computer friendly tune. Which he didn't do! So now I have been hunting on the internet for a person to program a chip to work with the set-up. The only person that seemed to have a clue was FASTCHIP.COM. Reason I ask is he was the only one that the right questions as to cam,compression and induction. Input???? M
 

·
Registered
Joined
·
3,867 Posts
Discussion Starter #3
It would be a huge help to know who's ECU is it. Is this car or a boat. GM or Ford ECU? Or a Mercruiser?
Sorry for the lack of info! I was just looking for info on the company! FWIW it is a 90 chevy blazer with a 350. It is a factory ECU and the engine and computer are not playing well together as we speak. I told the person I built the engine for that he will need to do some computer work to see potential and hear we are. In my search for someone that understands and programs to spec. I found these guys and the person I spoke with on the phone asked all the right questions and was all to understanding of the situation. He told me the problems before I had a chance to tell him and he was dead-nuts right! Again I was just asking if anyone had dealt with them! M
 

·
Premium Member
Joined
·
1,967 Posts
Who has ever dealt with fast chip out of Oklahoma? I built a friend a engine and told him it would NEED to be re-chipped for a computer friendly tune. Which he didn't do! So now I have been hunting on the internet for a person to program a chip to work with the set-up. The only person that seemed to have a clue was FASTCHIP.COM. Reason I ask is he was the only one that the right questions as to cam,compression and induction. Input???? M
I know him well....His name is Ed Wright.. You can't go wrong, the guy knows his stuff well. Highly recomend him. :)
 

·
Registered
Joined
·
3,867 Posts
Discussion Starter #6
If you talked to him and your comfortable with him, then go for it. I am use to dealing with these guys for GM ECUs. They are one of the very best. I would at least give them a call.
For Merc ECUs, its 1000000% Whipple.

LINK: ECU reprogramming
One last time! I just asked if anybody has dealt with them! M
 

·
Registered
Joined
·
3,867 Posts
Discussion Starter #9
Read my post above. I have know him for around 35 years, way before all this computer chip stuff. Very honest guy and knows what he's doing.
I think I was typing as you were responding and Ed was who I spoke with. I agree 100% The guy new the problems before I told him. He wanted the cam specs trany set-up and so on. His chip is already ordered and I wanted any info to satisfy my mind. I thank you for your'e input! Can't wait to get it and see the engine run as it should. M
 

·
Registered
Joined
·
123 Posts
You found one of the best out there, people bring cars from across the country for dyno tunes. Ed plays with superstock cars and does real well. Been around him a few years but not as many as RFR, he's old. lol......
 

·
Premium Member
Joined
·
1,967 Posts
You found one of the best out there, people bring cars from across the country for dyno tunes. Ed plays with superstock cars and does real well. Been around him a few years but not as many as RFR, he's old. lol......
Kevin, Ed closed his shop down and semi retired a while back. Just does internet sales on this stuff now.
Old huh?? LMAO! :D
 

·
Banned
Joined
·
1,263 Posts
Who has ever dealt with fast chip out of Oklahoma?
Ed Wright. He is out of Tulsa, Oklahoma. He is a big drag racer, so don't be suprised if he is unreachable some Fri's thru Monday's.

FYI: he does have a shop where he does custom tuning live, also. Not just an internet or phone order place.

He's been doing this for a long time.......basically same time Hypertech came out. Saw them match race against each other in two 'tuner' cars in PA eons ago.
 

·
Registered
Joined
·
3,867 Posts
Discussion Starter #13
Thanks for the responses most of you guys! I was just checking for feed back on an area I am not to educated in. Most of the stuff I dabble in these days would be carbed or MFI and simple ign builds! M
 
1 - 13 of 13 Posts
Top