Performance Boats Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
273 Posts
Discussion Starter #1 (Edited)
Ford 466 Turnkey Scoop to Pan, 10.2 to 1 pump gas motor. ( PHOTOS ADDED BELOW)
Clay Smith 615 lift solid lifter cam.
TRW pop-up pistons, (L-2443).
MSD Marine Disty. ( MSD ignition not included).
Heads match ported to intake manifold.
Edelbrock Victor Manifold.
Clay Smith Roller Rockers (Isky).
Clay Smith double springs.
Manley valves, 2.190 int. & 1.76 ext.
Holley 850 Double Pumper.
9 qt. oil pan.
Bassett Alum. Scoop.
Bassett Twisty Headers.
Ran my Gullwing to 84 MPH at 5300 RPM on GPS.
Local pick-up in Huntington Beach, CA.
$2700.00

call joe, (714) 745-8403

IMG_2418 (3).jpg
 

·
Registered
Joined
·
273 Posts
Discussion Starter #3 (Edited)
Not sure on the hours, but probably about ten trips to the lake and river. The picture in the ad is the only one i can find of the motor. The heads are the stockers with bigger valves, pocket port, and match ported to cobrajet. Id guess around 450 to 500 hp.
 
1 - 14 of 14 Posts
Top