Performance Boats Forum banner

1 - 20 of 21 Posts

·
Amber Racing Services
Joined
·
4,339 Posts
Discussion Starter #1 (Edited)
Here goes ...

Chrome Marine Alternator:Sold

Keith Black BBC Timing gear set up (Gen 4):Sold

Crane Stud Girdles:Sold

Rigid MS1065LZ 10" Compound Miter Saw: Sold

Casale Engineering 1 1/8" prop shaft coupler:Sold

2 sets of Crower Valve Springs - retail price $446.59, specs -
Part # 68555-1, 1.630" OD, 275# @ 1.950", 815# @ 1.150", Coil Bind @ 1.020" ... selling for $200/ea set:



Erson Valve Springs, specs - 1.677 OD dual, .635 ID, .900 max lift, 346 lbs @ 2.100 installed height, 1014 lbs @ 1.200 open pressure, Spring rate 742 lbs, Coil Bind 1.142, retail $429.50 ... selling for $200




Power hand tools, Milwaukee 3/4 drill motor $50, Makita circular saw $40, Porter Cable belt sander $40:



Interstate MegaTron Deep Cycle battery, accepts charge and withstands load test, can test w/ buyer present ... selling for $40



Optima D34M Blue Gel Battery, deep cycle, accepts charge and withstands load test, can test w/ buyer present, retail $199.00 ... selling for $100




Call me at 949-870-5773 with any questions. All pricing do not include shipping if needed.

Brian
 

·
Amber Racing Services
Joined
·
4,339 Posts
Discussion Starter #2 (Edited)
2 more items

RCD Blower crank hub (int. balanced) w/ degree ring, used but in fine condition, retails for $198 ... selling for $125

 

·
metalwax mike
Joined
·
1,696 Posts
thanks bob, i figuerd thats better than a double roller chain. :)bulb oh and the price is right. i have been on the look out for one of these for a while.
 

·
Amber Racing Services
Joined
·
4,339 Posts
Discussion Starter #8
more PM's answered ...

yes I will take Pay Pal for those of you who asked, [email protected], but I would like the 3% fee paid for by you and shipping (if needed)

Brian
949-870-5773 cell
 

·
Registered
Joined
·
5,717 Posts
Brian,...you got a "Pick ax" with a lil rust on the point? lookin for just the right one!
Thanks GUY!
 

·
Amber Racing Services
Joined
·
4,339 Posts
Discussion Starter #18
sorry, I got quite a few and forgot to PM you back. Which springs were you asking about?

The Crowers are basically new, 10 passes in a Super Comp Dragster each set. Fine for a boat. While the heads were set up for a .780 cam, the max rating is for .890 lift according to Crower's specs ... so they should work for your cam.

Call me on my cell if you're still interested.

Brian
949-870-5773
 
1 - 20 of 21 Posts
Top