Performance Boats Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
31 Posts
Discussion Starter #1
My crank is at the machine shop now. He's saying it needs to be turned 20/20. My builder is explaining to me that he does not build a motor with a crank turned more than 10/10 due to stress that will be put on the crank etc. the motor will be at 600 hp. I don't want to half @$$ build it. So it's looking like I'm going to be out another 1k on a crank... What's y'all's thoughts? Thanks for the advice.
 
1 - 1 of 1 Posts
Top