Performance Boats Forum banner

Status
Not open for further replies.
1 - 19 of 19 Posts

·
Registered
Joined
·
1,414 Posts
Discussion Starter #1
Hey Mike,, Just so you know I am not posting this to start shit with you,but I feel that all I had to go through to make this motor YOU sold me RIGHT, as far as the rods being in wrong, the crank issue, Having to buy a new balancer as the one you gave me was the wrong one, And just the headache of having to deal with all the bullshit that was wrong with this motor! I feel that you should refund $250,00 bucks and call it good, as I should not of had to go through or deal with the shit I did with that motor!
You told me you would stand behind it and take care of any problems that arise with it as it was A NEW MOTOR so if you are a man of your word I feel that this is fair! I have plenty of people that seen the motor, and know that I am NOT trying to bullshit you in anyway! So the ball is in your court,, Be the man you say you are, and put a end to a deal gone bad!
 

·
Registered
Joined
·
628 Posts
Wow!!

Hey Mike,, Just so you know I am not posting this to start shit with you,but I feel that all I had to go through to make this motor YOU sold me RIGHT, as far as the rods being in wrong, the crank issue, Having to buy a new balancer as the one you gave me was the wrong one, And just the headache of having to deal with all the bullshit that was wrong with this motor! I feel that you should refund $250,00 bucks and call it good, as I should not of had to go through or deal with the shit I did with that motor!
You told me you would stand behind it and take care of any problems that arise with it as it was A NEW MOTOR so if you are a man of your word I feel that this is fair! I have plenty of people that seen the motor, and know that I am NOT trying to bullshit you in anyway! So the ball is in your court,, Be the man you say you are, and put a end to a deal gone bad![/QUOT

Couldn't this be settled somewhere else? Like in private! :):)punch
 

·
Registered
Joined
·
19,800 Posts
just saw this............
here is the motor in question as i bought it..

http://www.performanceboats.com//showthread.php?t=48054&highlight=454+motor

i never used it, you called i offered you abrand new crank balanced from J & m speed shop in riverside ca and offered to ship it to you...at no cost..you said no.pgf457 offered you a nice crank balanced turned 30 over,straight from the machine shop you said no...iasked the guy i got the motor from to give you $250 and i would give you $250 he said hell no .he sold it to me and has nuthin to do with it as AS IS TO ME....you kept askin for $600 to make it right ,i bought it for $2200 and sold to you for $1800..all i did was exchange the ram for a perf manifold...

why dont you pm me and say hey look mouz sorry about the name calling and i feel $250 would make it right instead of airing out in the jetboat section which i dont go on very offen...try mannin up and send me a pm instead of on here..it might get you somewhere.
 

·
Registered
Joined
·
1,414 Posts
Discussion Starter #11
Been PM'ED MANY TIMES!
FIRST OFF I never asked you for $600 dollars so where you got that from is unbeknows to me! And I have PM'ED YOU AND GOT KNOW WHERE!!! And name calling lol I have never called you any names! you sold me a motor that was to be the same as you bought it,,, and bottom line it was not!!!! I have pm'ed you trying to work something out with you and you pretty much told me to go f,, myself !!!!! So yep now I am putting it out there for all to see that you are not a man of your word as you told me, any problem you would take care of! And I never turned down any offers for a crank and such, you never got back to me! YOU SAID yourself, that you will not do anything about it!,, So now through out all the lie's you want! I see how you work!:mad:
 

·
Registered
Joined
·
1,414 Posts
Discussion Starter #12
Hey Mike,, Just so you know I am not posting this to start shit with you,but I feel that all I had to go through to make this motor YOU sold me RIGHT, as far as the rods being in wrong, the crank issue, Having to buy a new balancer as the one you gave me was the wrong one, And just the headache of having to deal with all the bullshit that was wrong with this motor! I feel that you should refund $250,00 bucks and call it good, as I should not of had to go through or deal with the shit I did with that motor!
You told me you would stand behind it and take care of any problems that arise with it as it was A NEW MOTOR so if you are a man of your word I feel that this is fair! I have plenty of people that seen the motor, and know that I am NOT trying to bullshit you in anyway! So the ball is in your court,, Be the man you say you are, and put a end to a deal gone bad![/QUOT

Couldn't this be settled somewhere else? Like in private! :):)punch
Tryed that,,
 

·
Registered
Joined
·
89 Posts
Tryed that,,
Hey watergun4u,

In mikes corner on this as he did call me couple weeks back & asked if I could help him with this as he is not to motor savy. I said yes come by & pick up a stock bbc gen 4 crank & balancer. I asked him to ask if you needed internal or exturnal balanced. I know he offered it to you free of charge. So what happened? Guess you just need cash & NOT PARTS. So just for all to see, What parts do you need. Please let me know & I'll give them free of charge to MOUZER & he will ship free of charge. I do have a 396 crank or 454 I think yours is a bbc 396 .030 over? I do believe he offered you a trade out on the pan with another boat friend but you passed on it the called crying say he owed ya a jet pan instead of a v-drive, he offerd to ship ya a jet pan if you returned the v-drive but you clamed it was junk & again just asked for cash.

So again I say let me know what you need & it will be shipped out to you. Have a great day & safe boating
 

·
Registered
Joined
·
1,414 Posts
Discussion Starter #14 (Edited)
Hey watergun4u,

In mikes corner on this as he did call me couple weeks back & asked if I could help him with this as he is not to motor savy. I said yes come by & pick up a stock bbc gen 4 crank & balancer. I asked him to ask if you needed internal or exturnal balanced. I know he offered it to you free of charge. So what happened? Guess you just need cash & NOT PARTS. So just for all to see, What parts do you need. Please let me know & I'll give them free of charge to MOUZER & he will ship free of charge. I do have a 396 crank or 454 I think yours is a bbc 396 .030 over? I do believe he offered you a trade out on the pan with another boat friend but you passed on it the called crying say he owed ya a jet pan instead of a v-drive, he offerd to ship ya a jet pan if you returned the v-drive but you clamed it was junk & again just asked for cash.

So again I say let me know what you need & it will be shipped out to you. Have a great day & safe boating
I am glad you are in Mike's corner,
Ok just so this is set right, Mike told me to stop by a friend of his or something like that on the way home from picking up the motor,And no I didn't want to do that, had far enough to drive! No big deal I took care of the pan issue!, Now as far as the crank and balancer went he told me he could get a crank new skat,, for $250, myself I find that hard to belive, as I know those cranks are much more! I told him to just send me the $250 and I would take care of it , and just call it a done deal I didn't want to go through the hassel of all the shipping and crap! But if thats what he want's to do then thats fine! The Parts needed are Crank,STD BEARING'S, Balancer, for exturnally balanced, !!!!!!!!! I am in NO why out for MONEY, JUST WANT SHIT FIXED!
 

·
Registered
Joined
·
1,189 Posts
I got no dog in this fight, but if all Ol' Mouser did was swap out intake manifolds, then why are you up his butt? Seems to me he bought a motor and sold a motor, if it was junk then you both got screwed.

That's my $.02 and I'm out.
 

·
Registered
Joined
·
1,414 Posts
Discussion Starter #16
I got no dog in this fight, but if all Ol' Mouser did was swap out intake manifolds, then why are you up his butt? Seems to me he bought a motor and sold a motor, if it was junk then you both got screwed.

That's my $.02 and I'm out.
lol Thats not the issue!!! more to it then just that!
 

·
Registered
Joined
·
1,264 Posts
I got no dog in this fight, but if all Ol' Mouser did was swap out intake manifolds, then why are you up his butt? Seems to me he bought a motor and sold a motor, if it was junk then you both got screwed.

That's my $.02 and I'm out.
same here, you both got screwed and now Mouz is the bad guy after he offered...

Dude, you are barking up the wrong tree, everyone knows Mike does not build motors.
If I bought a motor and sold it, and it had a problem. Oh well you should have taken it apart and looked at it.
I will "never" buy a motor I plan on using with out it being apart to mic and inspect.

go cry somewhere else, cause it sounds like you want the motor and cash....


johnny
 

·
Registered
Joined
·
1,414 Posts
Discussion Starter #19
same here, you both got screwed and now Mouz is the bad guy after he offered...

Dude, you are barking up the wrong tree, everyone knows Mike does not build motors.
If I bought a motor and sold it, and it had a problem. Oh well you should have taken it apart and looked at it.
I will "never" buy a motor I plan on using with out it being apart to mic and inspect.

go cry somewhere else, cause it sounds like you want the motor and cash....


johnny
KICK ROCKS DUDE YOU GOT NO CLUE, SO MIND YOUR OWN BIZ, AS YOU HAVE NO IDEA ON THE AGREEMENT THAT WAS MADE! i JUST WANT WHAT i WAS TOLD IT TO BE!
 
1 - 19 of 19 Posts
Status
Not open for further replies.
Top