Performance Boats Forum banner
1 - 20 of 53 Posts

·
Future GN Racer!
Joined
·
2,194 Posts
Hey Alpha, here are some pics. I hope this is what you are looking for. Doug is a great guy, and his boat is SICK!!! Take a look at Danny Bells priceless boat also. These are two VERY nice boats. I hope my 21' Rayson Craft will be close to being as nice.
Lock
 

Attachments

·
My Peace
Joined
·
639 Posts
Damn, that thing is immaculate! And it's fast, too? Amazing!

I don't think I've ever seen so much plumbing next to the steering quadrant before, though. What does he have going on back there? Remote fuel and oil filters sure, but some of that looks like it's going into the stuffing box, and some of the other bits...
 

·
Registered
Joined
·
66 Posts
How fast is it? Nice boat.
The few passes at the regatta were 107 on the radar but he did not have it propped right for the conditions. It is set up for the river. Last trip to Parker GPS was showing 120 plus with more throttle. Fast enough where I wont ask for a ride. The thing I like the most about these hull's is there rough water ride and turning ability. It does not have to be flat to take them off the trailer.
 

·
Backwards Buick
Joined
·
486 Posts
The few passes at the regatta were 107 on the radar but he did not have it propped right for the conditions. It is set up for the river. Last trip to Parker GPS was showing 120 plus with more throttle. Fast enough where I wont ask for a ride. The thing I like the most about these hull's is there rough water ride and turning ability. It does not have to be flat to take them off the trailer.
This bottom setup has to be a major factor in its speed capabilities
 

·
''GHOST of COLDFIRE''
Joined
·
1,689 Posts
The fastest Rayson ive seen was a white psi blown injected zommied at the river in 02 it was set up for outlaw gn class the guy said? Jerry knows who the guy is i think he owned Vanbeenans spectra gn before that.
 
1 - 20 of 53 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top