Performance Boats Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
0 can anyboy tellme how to wire a min sttarter o my 460 ford jet boat I have a unilite distributor . I orginaly had 4 wires main battey cable and large guage red wire go together on the batt terminal white wire to "S" terminal and orange wire to " R" terminal. now only 2 terminals. where do these wires go now help.
 

·
Registered
Joined
·
7,464 Posts
Buy a diode from radio shack and tap into the white wire with momentary current flowing to the orange wire during the crank ( orange goes back to the coil or ballast resistor, 12v crank circuit) The idea is to give a 12v "boost" to the ignition during the engine cranking , your white, yellow or white with a trace is typically your starter S wire
 
1 - 3 of 3 Posts
Top