Performance Boats Forum banner

Status
Not open for further replies.
1 - 20 of 35 Posts

·
Registered
Joined
·
19,818 Posts
Discussion Starter #1 (Edited)
FROM $10 TO $250
PM ME IF YOU SEE ANYTHING YOU NEED
V DRIVE FLAT BOTTOM PARTS >

I HAVENT HAD A CHANCE TO CLEAN ANYTHING YET

PLEASE READ THIS IS THE LIST OF SOLD ITEMS NOT AVAILABLE ANY MORE
SOLD STUFF...........................
VALVE COVERS
T-HANDLE
PROP PULLER
1-OLD SCHOOL SPARK ARESTER
2- 2 BLADES
TACH POD W/TACH
v-drive without braces/ mount
1" PROP SHAFT
 

·
V-Drive 4 ever
Joined
·
1,810 Posts
Hey Mike you have any props for 1 1/8th shaft? 2 or 3 blade will work.. what are the gears out of and what ratio?
 

·
Registered
Joined
·
19,818 Posts
Discussion Starter #14
How complete is the cav plate setup and how much?
as u can see in the pics it was homemade from a fixed plate
the 2 outside turn buckles were fixed ( cut the plate) the rest is normal
all the turn buckles, rod, pads, finish line handle $250
 

·
Registered
Joined
·
19,818 Posts
Discussion Starter #15 (Edited)
Hey Mike you have any props for 1 1/8th shaft? 2 or 3 blade will work.. what are the gears out of and what ratio?

all 1"

3 blade 13x13 14 x 14 2 blade 11 1/2x16 11 1/2 x15
 

·
Registered
Joined
·
19,818 Posts
Discussion Starter #18 (Edited)
3 blades 100 each
2 blades 150 each

$20 ship
 

·
Registered
Joined
·
19,818 Posts
Discussion Starter #19
2-blades dont say anything on them will do $225 for both great back ups....size is what the seller thought they were they all came from his boat.
 
1 - 20 of 35 Posts
Status
Not open for further replies.
Top