Performance Boats Forum banner

1 - 6 of 6 Posts

·
"BEER BUDGET RACING"
Joined
·
3,621 Posts
I looked into buying that twin gemini kit before I went with the NOS cheater. Everything I read about them was positive. I just didn't need that big of a shot
 

·
AKA Blownjet 468
Joined
·
1,205 Posts
NXexpress kits are top of the line stuff. Their plates are billet,with machined holes, not brass
Tubes epoxied in a 1/2" spacer. Also like their solonoids- bottom discharge, with a purge port.
 

·
Registered
Joined
·
416 Posts
ANY nitrous kit is JUNK if it is not properly set up and flowed for the tune ups!! I have ran nitrous for lots of years in many different toys without any problems but you must know how to tune for different weather conditions, fuels, etc...

lots of us jet guys use the Edelbrock fogger with the E3 nozzle, A fogger gives you better cylinder to cylinder controll over plate systems

Good people to work with from here are..

Mark @ Edelbrock
Mike Miller @ mike miller racing engines( red rocket here on the boards)
Chris @ B1 Racing LLC. - Home - Santa Ana, CA
Darrin @ Home Page
Travis @ [email protected]

Good luck with your project!!
 
1 - 6 of 6 Posts
Top