Performance Boats Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
557 Posts
Go to an electrical supply house, Lowes, ect. and get a 3/4" Strain relief connector.
Run your cable through it, and tighten it down.

Ken
 

·
lol, right.....
Joined
·
1,168 Posts
This is whats on my boat:



This is a strain relief connector like Ken mentioned, not sure if this is what Lowes would have or not.... Looks pretty cool though.

 

·
Registered
Joined
·
2,135 Posts
I bought one of these, bored them out to 5/8(I think) and the 43 series cable fit through. There is enough material there to do it.

EDIT didn't realize the whole page would post, its part 456117 for the 33 series.

 

·
21 Daytona
Joined
·
5,291 Posts
Go to an electrical supply house, Lowes, ect. and get a 3/4" Strain relief connector.
Run your cable through it, and tighten it down.

Ken
will the 3/4 tighten down to be water tight on a 43 series cable?
I have always used a 1/2 and had to work it on.
 
1 - 9 of 9 Posts
Top