Performance Boats Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
hi,
I am new to the forum and am needing some help. I am ready to rebuild my cp motor. Currently have a 454 in it, was a good runner until it blew after about 15 hrs. I am on the fence between a new 540 or 632. Boat was running 92 with the old motor. Can you recommend a good engine builder?, also need to get a ratchet and pop off installed, anyone close to north texas. Any help would be great.
Thanks.
 

·
Premium Member
Joined
·
1,623 Posts
hi,
I am new to the forum and am needing some help. I am ready to rebuild my cp motor. Currently have a 454 in it, was a good runner until it blew after about 15 hrs. I am on the fence between a new 540 or 632. Boat was running 92 with the old motor. Can you recommend a good engine builder?, also need to get a ratchet and pop off installed, anyone close to north texas. Any help would be great.
Thanks.
I will send you a fresh 556 with dual carbs makes over 1000 hp and a jet away for 25k. All bad ass nice shit. Josh Patridge 562-400-9062
 
1 - 2 of 2 Posts
Top