Performance Boats Forum banner

Pump Gas 540 Boat Motor or Street

2K views 0 replies 1 participant last post by  shueman 
#1 ·
Posting for a customer/friend from back in Ohio ... Pump Gas 540 Boat Motor or Street.

Merlin X 9.8 Aluminum block, studded mains and heads, O-ring copper gaskets, Merlin aluminum 350 heads, 5 angle valve job, with Inconel exhaust valves, Jesel Sportsman rockers and timing belt. Bullet custom ground HYD roller with Isky high intensity lifters, Diamond forced air pistons with pin upgrade .200, thermal coated tops, Callies I beam rods L19 bolts, 4.25 Callies dragon slayer crank, Fluidampr balancer, Milodon 10 quart oil pan,, Blower shop 1471 blower and inter cooler, Hogans billet carb adapter, Quikfuel Black diamond marine 1050s, K & N marine flame arrestors, race fuel pump and regulator, MSD distributor and wires. All new parts 10 hours run time. Motor made 947hp 845 torque at 6000 rpm with 8 lb boost. Sold boat and no longer need. $20,000 FIRM.

Contact Paul @ 740-477-5867 ... tell him Gary sent ya :))THumbsUp
 

Attachments

See less See more
5
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top